JAZ seat users

[Tommy D]

Anyone here with JAZ poly seats, how did you mount them tryed to mount them to the stock seat slider but the heat began to warp the tracks. Does the JAZ mounting kit fit a Fox body or is there another way???

[ssperf]

hey i have seen them mounted a few ways i machined alum blocks 2by 3 and milled them on the angle of the floor at the rear bolt thru the floor and used 11/2 alum by 3/8 bolted to the front floor and drilled and taped into the rear blocks with machine screws-- using the jaz sliders-----i have seen them mounted by using the jaz mounts one bolted to the floor and the other bolted to that peace faceing in but it looks like you need to trim and notch the front of the second bracket to to clear the floor pan as it tapers up towards the front they have bolt holes that you can use to try and get the angle you want to mount the seat in -- i have also seen the stock floor bracket and slider used but two peaces of steel welded across the floor backet to stiffin it up and or bolt the jaz slider to i guess you could drill and bolt the cross peaces if you dont have a welder hope this helps