nic
10-12-2002, 01:03 PM
I was putting on my systemax II intake & ran into a problem.On the lower intake I hammered down the 2 rivets that hold the baffle plate in place for the pcv valve as hard as I could,but the baffle plate is still a little loose (very little).I know that the rivets won't come loose,but I'm a little concerned about it down the road & also if it may rattle in there. I wish holley would've sent some shorter rivets in this kit. Some of my other 5.0 buddies said not to even worry about it because there's gonna be so much oil that's gonna be sloshing around in there.-Just a little concerned.