Help W/ Weld Alumastars

[CWELL28]

WHAT WOULD THE CORRECT BACKSPACING BE FOR A 15X10 WELD ALUMASTAR ON A 94 & UP MUSTANG? I WILL BE USING A 28X10.5 MT SLICK. THANKS FOR YOUR HELP.

[snakehorse1]

Weld Alumistar 15 x 10 w/ I believe 5.375 or 5.5 back-space. I run the 28 x 12.5 ET STREET (Same size as a 28 x 10.5 ET DRAG) Fits up real nice even with the quad shocks on! If you don't have aftermarket control arms they will rub a-little when turning and big bumps. I'll check FOR SURE tonight and submit a picture for ya -:D

[snakehorse1]

Ok, it doesn't state the backspace on my receipt and I would have to remove it to measure accurately ( car is in trailer right now) however I do have the part # WELD ALUMA STAR 15 X 10 #88510212. I got them right when they first came out in '97 so I'm not sure if this part number means anything anymore but they should be able to look it up and cross reference what Backspacing they are. Again, I think they are either 5.375 or 5.50:confused: and I remember that they had to special order the rears - hope this helps:(

[snakehorse1]

Nice and snug!!

[CWELL28]

Thanks for your help.