747
06-20-2005, 12:00 AM
747 For Sale
89 Coupe Roller
Will sale many different ways depends what stays on car.
FT:D&D K-member,A-arms,Coil overs. Qa1 adjustable struts,Upr CC plates,Flaming river rack and shaft,Willwood Brakes
Rear: Built 8.8 welded tubes,Strange 33 spline axles & light weight spool. 3.55 gears just installed. TA rear girdle.Aero space brakes,
D&D double adjustable uppers,D&D Coil overs with Lakewood 50/50 shocks,Adjustable lowers,Antiroll bar,60"wheelie bars.Deist Parachute.
Wheels: Ft WEld aluma star 1pc 2.0 w/26-5-15 M/T
Rears Weld aluma star 2.0 15-10 w/beadlocks & 28-10.5-15s M/T Slicks.
Interior: Grey and Black. Autometer Procomp gauges,Tach,fuel,boost,H20 temp,Vac,Oil.Percys dual egt. Fire Fox 10lb system w/pull cord and billet brackets. Corbeau seats. PG shifter mounted w/stock boot looks like 5spd.
Spearco 2000hp+ water/air IC 4"in 5"&4"out all alum piping,water pump,lines & fittings. Vortech's new race bypass valve. Custom cell 6 gallons ice water and 4 gallons fuel mounted side by side.
New Black carpet,Painless wiring panel in radio slot,MSD 7al-2,Msd launch control,Fast System with every option.
Fuel System, Weldon 2035a #12 to pump #10 to Y block two #8's to rails and two #8's to reg.
Cage certified to 7.50's tell Jan2008 then 8.50 unless upgraded. 10 point MS now.
Cars very solid and go's straight Best ET is 8.23 @170 best 60ft is 1.26 on 28-10.5-15s slicks @ 3160lbs
Cars been in just about every Mustang Magazine.
Still has all factory glass, power windows etc.
Complete roller add motor and trans go race 15.5k.
Roller minus Fast sys & intercooler 12k will put pass seat back in and fix holes in cowl and swap out with new 10 gal fuel cell.
Can take off wheels,fuel system, etc to drop price.
!!(I DO NOT WANT TO PART THE CAR OUT)!!
New cars almost done and I could use the parts to finsh it. What does not sale with the car will be reused. Thanks
Eric Stubbs
281-468-1805 cell
pics here--> http://www.cardomain.com/ride/499872/1
89 Coupe Roller
Will sale many different ways depends what stays on car.
FT:D&D K-member,A-arms,Coil overs. Qa1 adjustable struts,Upr CC plates,Flaming river rack and shaft,Willwood Brakes
Rear: Built 8.8 welded tubes,Strange 33 spline axles & light weight spool. 3.55 gears just installed. TA rear girdle.Aero space brakes,
D&D double adjustable uppers,D&D Coil overs with Lakewood 50/50 shocks,Adjustable lowers,Antiroll bar,60"wheelie bars.Deist Parachute.
Wheels: Ft WEld aluma star 1pc 2.0 w/26-5-15 M/T
Rears Weld aluma star 2.0 15-10 w/beadlocks & 28-10.5-15s M/T Slicks.
Interior: Grey and Black. Autometer Procomp gauges,Tach,fuel,boost,H20 temp,Vac,Oil.Percys dual egt. Fire Fox 10lb system w/pull cord and billet brackets. Corbeau seats. PG shifter mounted w/stock boot looks like 5spd.
Spearco 2000hp+ water/air IC 4"in 5"&4"out all alum piping,water pump,lines & fittings. Vortech's new race bypass valve. Custom cell 6 gallons ice water and 4 gallons fuel mounted side by side.
New Black carpet,Painless wiring panel in radio slot,MSD 7al-2,Msd launch control,Fast System with every option.
Fuel System, Weldon 2035a #12 to pump #10 to Y block two #8's to rails and two #8's to reg.
Cage certified to 7.50's tell Jan2008 then 8.50 unless upgraded. 10 point MS now.
Cars very solid and go's straight Best ET is 8.23 @170 best 60ft is 1.26 on 28-10.5-15s slicks @ 3160lbs
Cars been in just about every Mustang Magazine.
Still has all factory glass, power windows etc.
Complete roller add motor and trans go race 15.5k.
Roller minus Fast sys & intercooler 12k will put pass seat back in and fix holes in cowl and swap out with new 10 gal fuel cell.
Can take off wheels,fuel system, etc to drop price.
!!(I DO NOT WANT TO PART THE CAR OUT)!!
New cars almost done and I could use the parts to finsh it. What does not sale with the car will be reused. Thanks
Eric Stubbs
281-468-1805 cell
pics here--> http://www.cardomain.com/ride/499872/1