PDA

View Full Version : Rolling SS/O Coupe 7.50 cert (Former Dave Zimmerman Car)


outlawtrbo
07-07-2005, 04:48 PM
1987 Ford Mustang SS/O Rolling Chassis $12,000 O.B.O.
(Motor NOT Included)

You are looking at a 1987 Super Street Outlaw rolling chassis. This chassis has 24,710 original miles and has never be wrecked or seen rain or snow. I am selling the roller because I have a drag radial car that is taking most of my time and money. I was going to try to build two cars and run two separate classes (SS/O & Drag Radial) but time and finances wont permit it. This roller was built and raced by Dave Zimmerman of Team Z Motorsports. This chassis hooks hard and goes straight. It has seen consistent 7.80 passes at over 180. The cage is Certified to 7:50 till 2007. If you have any questions please email me and I will get back to you ASAP. Thanks for looking. I can be reached at 219-406-7218.


CHASSIS
Team Z Chassis
Aerospace four wheel disk brakes
Ford 9' back braced
Ladder Bars
Koni rear coilovers
Mini Tubbed
Wheelie Bars
Weld Prostars w/ 28/10.5 MT slicks
5/8 Rear Studs
Manual Brakes
Caster Camber Plates
Lakewood front Coilovers
Team Z Motorsports K Member
Team Z Motorsports Tubular A Arms
Manual Rack
Dual Drive shaft loops
Bump steer kit

EXTERIOR
Painted Dark Plum Pearl coat (almost perfect paint)
4' zeus cowl hood (w/ Grim Reaper painted under the clear coat, See pics)
Smooth front nose
Fiberglass deck lid
Skinny Kid rear aluminum wing
Simpson parachute (chute is new)
Recessed back window (for aerodynamics)

ELECTRONICS
Twin 16 volt batteries
MSD-7al3 ignition
MSD "Pro Power" coil
Shogun "Super Pump" remote water pump
Flaming river push/pull battery switch
Painless wiring switch panel
Transbreak Button
Line Lock button
All factory lights work as well as stop and turn lamps

INSTRUMENTS
Fuel
Oil
Water
Autometer Playback Tach
Shift light w/ dial adjustment on back

FUEL SYSTEM
5 Gallon fuel cell
Weldon 2040 Regulator
-12 braided feed from tank to pump
-10 braided feed from pump to front
-8 braided return to tank
Kinsler Inline fuel filter

MISCELLANEOUS
B&M Pro bandit shifter and cable (for PG Trans)
Cage painted & clear coated to match exterior
Quick release steering wheel
Two fiberglass Racing seats with covers
Rear seat rear carpeted
Mini Tubs carpeted
High mount aluminum parachute release lever
Crank windows
Line lock

I am sure I am forgetting some things, so please if you have any questions or need more pics, email me.


Picture 1 (http://www.lightsandthings.com/pictures/car1.jpg)

Picture 2 (http://www.lightsandthings.com/pictures/car2.jpg)

Picture 3 (http://www.lightsandthings.com/pictures/car3.jpg)

picture 4 (http://www.lightsandthings.com/pictures/car4.jpg)

Picture 5 (http://www.lightsandthings.com/pictures/car5.jpg)

Picture 6 (http://www.lightsandthings.com/pictures/car6.jpg)

Picture 7 (http://www.lightsandthings.com/pictures/car7.jpg)

Picture 8 (http://www.lightsandthings.com/pictures/car8.jpg)

Picture 9 (http://www.lightsandthings.com/pictures/car9.jpg)

Picture 10 (http://www.lightsandthings.com/pictures/car10.jpg)

Picture 11 (http://www.lightsandthings.com/pictures/car11.jpg)

Picture 12 (http://www.lightsandthings.com/pictures/car12.jpg)

Picture 13 (http://www.lightsandthings.com/pictures/car13.jpg)