NASDSTANG
08-03-2005, 07:58 PM
thinking about maybe a trade for a S/C coupe, preferably with a/c and a some cash. or a nice stroked s/c car
has a 414 stroker, 71 block, r series heads fully ported and polished w/ pushrod inserts, flow 361 cfm, arp head studs, 2" kooks with a 4" collector,1.6 comp pro magnum roller rockers, rocker stud girdles, eagle 4340 forged crank and h beam rods, arp main studs, with dss main girdle, probe forged 22 cc dished pistons .060 over, comp custom ground solid roller cam w/ .682 lift, alum bodied solid roller lifters, has a cloyes billet 9 keyway timing chain, super victor intake, and a demon race carb. est to make around 650hp
chassis mods as of now are;
factory 5 upper and lower tubular control arms
torque boxes welded
lower battle boxes
eibach springs with drag bag
lakewood 90/10 drag struts
lakewood 50/50 shocks
subframes
manual brakes
manual rack
3.55 fms gears
fms hardened axles
fms aluminum D.S
MSD 6al
TCI sfi flexplate
has power locks and windows
trans;
GER built C-4 w/ trans brake
9" race converter w/ 4000 stall and front and rear anti-ballooning plates
B&M street bandit shifter
car needs head intake exh and timing cover gaskets, pushrods, distributor and wires, radiator, shifter cable and starter to be complete.
email offers and pics. have pics for serious inq.
ksago@tampabay.rr.com
has a 414 stroker, 71 block, r series heads fully ported and polished w/ pushrod inserts, flow 361 cfm, arp head studs, 2" kooks with a 4" collector,1.6 comp pro magnum roller rockers, rocker stud girdles, eagle 4340 forged crank and h beam rods, arp main studs, with dss main girdle, probe forged 22 cc dished pistons .060 over, comp custom ground solid roller cam w/ .682 lift, alum bodied solid roller lifters, has a cloyes billet 9 keyway timing chain, super victor intake, and a demon race carb. est to make around 650hp
chassis mods as of now are;
factory 5 upper and lower tubular control arms
torque boxes welded
lower battle boxes
eibach springs with drag bag
lakewood 90/10 drag struts
lakewood 50/50 shocks
subframes
manual brakes
manual rack
3.55 fms gears
fms hardened axles
fms aluminum D.S
MSD 6al
TCI sfi flexplate
has power locks and windows
trans;
GER built C-4 w/ trans brake
9" race converter w/ 4000 stall and front and rear anti-ballooning plates
B&M street bandit shifter
car needs head intake exh and timing cover gaskets, pushrods, distributor and wires, radiator, shifter cable and starter to be complete.
email offers and pics. have pics for serious inq.
ksago@tampabay.rr.com