BlownV10F350
08-19-2005, 08:07 PM
1989 LX hatch, Stock suspension roller for sale, paint is 2 years old 5" HO fibertrends hood.New headlight kit complete, new taillights.
AJE K-Member
AJE double adjustable front control arms
QA1 front struts with coil overs
Strange pro race front brakes and manual conversion kit
Flamining river manual rack and steering shaft
UPR Billit caster camber plates
HPM bump steer kit
Wolfe racecraft front end limters
10 point steele cage cert to 7.50 until 08 of 2008
Stroud window net
wolfe rear adjustable lower control arms
Custom double adjustable uppers
Wolfe rear anti-roll bar
AJE 42" wheelie bars
QA1 rear adjustable shocks
Wolfe chute mount kit
New 9" rear stock dim. with adjustable mounting points, strange ultra case with 3.70 pro gear load bolt option 40 spline spool and gun drilled axles and pro race rear brakes( I spent 5k on this rear has 14 passes on it)
Stroud chute (blue)
MSD digtal 6
Autometer gauges, Tach oil pressure, water temp, fuel pressure, nos pressure, volts
ARC panel
Bottle heater
RCI 15 gallon alum. cell
BG 400 pump and filter -10 line to carb
Flamining river kill switch
B&M pro ratchet shifter
Hurst line lock
B&M trans brake button
Kirkey alum seats with covers
Taylor stainless batt. box
Weld draglites 15x3.5 with 27.5 ET front runners 15x10 with 28x 10.5 stiff 4 passes on the rears
Car is clean and straight and has gone 1.25 60' with no wheelie bars and has ran 8.30's at over 165 with a BBF with spray in it car hooks hard and straight.
much more I sure i missed perfect DR or wild street car or 10 wide car. still has working power windows .
Asking $10500 OBO or would sell without rear end for $6500 OBO
P.S I will have pics ready to e-mail next week.
Selling to build 2005 BIW Turbo car
AJE K-Member
AJE double adjustable front control arms
QA1 front struts with coil overs
Strange pro race front brakes and manual conversion kit
Flamining river manual rack and steering shaft
UPR Billit caster camber plates
HPM bump steer kit
Wolfe racecraft front end limters
10 point steele cage cert to 7.50 until 08 of 2008
Stroud window net
wolfe rear adjustable lower control arms
Custom double adjustable uppers
Wolfe rear anti-roll bar
AJE 42" wheelie bars
QA1 rear adjustable shocks
Wolfe chute mount kit
New 9" rear stock dim. with adjustable mounting points, strange ultra case with 3.70 pro gear load bolt option 40 spline spool and gun drilled axles and pro race rear brakes( I spent 5k on this rear has 14 passes on it)
Stroud chute (blue)
MSD digtal 6
Autometer gauges, Tach oil pressure, water temp, fuel pressure, nos pressure, volts
ARC panel
Bottle heater
RCI 15 gallon alum. cell
BG 400 pump and filter -10 line to carb
Flamining river kill switch
B&M pro ratchet shifter
Hurst line lock
B&M trans brake button
Kirkey alum seats with covers
Taylor stainless batt. box
Weld draglites 15x3.5 with 27.5 ET front runners 15x10 with 28x 10.5 stiff 4 passes on the rears
Car is clean and straight and has gone 1.25 60' with no wheelie bars and has ran 8.30's at over 165 with a BBF with spray in it car hooks hard and straight.
much more I sure i missed perfect DR or wild street car or 10 wide car. still has working power windows .
Asking $10500 OBO or would sell without rear end for $6500 OBO
P.S I will have pics ready to e-mail next week.
Selling to build 2005 BIW Turbo car