Nick T.
10-24-2005, 04:08 PM
I have put in the best parts and used the best people and resources to build a professional race car. This car was originally being built to handle a turbo w/2,250 horsepower. However it may be used for either, blown, nitrous or naturally aspired applications as well. THE CHASSIS IS BARE AT THIS POINT. ALL ITEMS NOT ASSEMBLED ARE MARKED NOT ASSEMBLED. Call (818) 219-3011 or email me ford818@yahoo.com for more info. Have all receipts. Invested $ 35,000 already as is. MAKE ME AN OFFER, I DONT WANT TO PUT IN A PRICE THAT YOU MAY NOT THINK IS FAIR.
Chassis Description: (WILL COMPLETE WELDING IF DESIRED)
A full tube, double framed (optional), Skinny Kid Race Cars blue printed, Fab-Tech Custom Fabrication & Welding (Chatsworth, CA) constructed, chassis that will be good for up to 6.00 seconds in the quarter mile.
Body: (NO CARBON FIBER COMPONENTS INSTALLED)
Originally a 2003 Mustang body in white. All carbon fiber components from Hairy Glass, Inc. (www.hairyglass.com) Roof will remain steel. One piece front end with cowl hood, doors (also have all door handle components), deck lid, rear bumper, quarter panels (34" wheel well opening).
Rear End:
Built by Skinny Kid, housing is constructed with precision fixturing, lazer cut, complete 4130 construction. You can run Rear rims/slicks with correct offset either a, 16 x 16 34.5 x 17 slick or outlaw 10.5w. Axles and brakes are from strange.
Suspension: (INSTALLED)
All suspension components are from Skinny Kid as well. 4 link setup, wish bone, anti-roll bar, wheelie bars 65", shocks, spings/struts(strange) spindle mount a-arm kit, front brakes & master cylinder(strange).
Additonal Items:
-Duel parachute air launcher with mounting bracket. (NOT INSTALLED)
-Weld Aluma Star 2.0 spindle mount 15 in. x 3.5 in. with Goodyear 25 in. x 4.5 in. tires.
-Fire system. (NOT INSTALLED)
-Pedal assembly with optional clutch pedal. (NOT INSTALLED)
-Flaming River rack & pinion.
-Steering column kit with grant wheel.
-Aluminum Flywheel.
-Aluminum rear wing. (NOT INSTALLED)
-SB Ford belt drive Skinny Kid engine plate & SB Ford to Chevy chassis Skinny Kid mid plate
-Mock up 351 w block.
-Aluminium seat with cover.
Chassis Description: (WILL COMPLETE WELDING IF DESIRED)
A full tube, double framed (optional), Skinny Kid Race Cars blue printed, Fab-Tech Custom Fabrication & Welding (Chatsworth, CA) constructed, chassis that will be good for up to 6.00 seconds in the quarter mile.
Body: (NO CARBON FIBER COMPONENTS INSTALLED)
Originally a 2003 Mustang body in white. All carbon fiber components from Hairy Glass, Inc. (www.hairyglass.com) Roof will remain steel. One piece front end with cowl hood, doors (also have all door handle components), deck lid, rear bumper, quarter panels (34" wheel well opening).
Rear End:
Built by Skinny Kid, housing is constructed with precision fixturing, lazer cut, complete 4130 construction. You can run Rear rims/slicks with correct offset either a, 16 x 16 34.5 x 17 slick or outlaw 10.5w. Axles and brakes are from strange.
Suspension: (INSTALLED)
All suspension components are from Skinny Kid as well. 4 link setup, wish bone, anti-roll bar, wheelie bars 65", shocks, spings/struts(strange) spindle mount a-arm kit, front brakes & master cylinder(strange).
Additonal Items:
-Duel parachute air launcher with mounting bracket. (NOT INSTALLED)
-Weld Aluma Star 2.0 spindle mount 15 in. x 3.5 in. with Goodyear 25 in. x 4.5 in. tires.
-Fire system. (NOT INSTALLED)
-Pedal assembly with optional clutch pedal. (NOT INSTALLED)
-Flaming River rack & pinion.
-Steering column kit with grant wheel.
-Aluminum Flywheel.
-Aluminum rear wing. (NOT INSTALLED)
-SB Ford belt drive Skinny Kid engine plate & SB Ford to Chevy chassis Skinny Kid mid plate
-Mock up 351 w block.
-Aluminium seat with cover.