Need Help!! What Cam Do I Go With????

[obadgixxer750]

I HOPE SOMEONE CAN HELP ME. I HAVE A STOCK BOTTOM END 5.O WITH 30LB INJECTORS,75MM PRO-M,75MM ACCUFAB T/B,TRICK FLOW TW HEADS,1.6 ROCKERS,TRICK FLOW TRACK HEAT INTAKE.I NEED A CAM THAT I DONT HAVE TO FLY CUT THE PISTONS OR ANY OF THAT STUFF THAT I CAN JUST PUT RIGHT IN.I NEED ONE THAT WILL WORK WELL WITH ALL THE PARTS I HAVE AND RESPOND TO A SMALL SHOT OF NOS.I WOULD GO CUSTOM GRIND NOW BUT I AM WAITING UNTILL I BOLT ON THE VORTEC TO GET A CUSTOM GRIND.FOR NOW I JUST WANT TO BUY ONE THAT WILL WORK WELL. ANY HELP WOULD BE EXCELLENT.THANKS:rolleyes:

[kanepsycho]

Since you will go to another grind and are itchy to run a cam, go with a E303 or the TFS stage 1 cam. Affordable and will give some extra grunt. Of course, the stock cam isn't really that bad if you want to save even more money.......your call.

Not more than 224° @ 0.050" duration or 0.540" lift, so they say.

But do check the clearance. You just never know..........

[LX427]

I agree.

[TURBOJ2]

The Lunati part #L-51014 is an excellent choice for a mostly bolt-on motor such as yours.I've had experience with that particular cam and seems to work equally as good with a blower as it does with nitrous.But I would also suggest you check piston to valve clearance with most any cam swap.