Fast87_Mustang
02-09-2006, 04:22 PM
A460 block, 4.600 bore, 9.800 deck height, roller cam bearings, bushed lifter bores, screw in freeze plugs, 800.00
4340 forged 4.150 crank, .010 mains/std. rods, rod journals are 2.100 with big block chevy width, 750.00
6.990 aluminum rods for above crank, 40 1/8th mile passes on rods, R&R pro billit rods, .990 pin 450.00
or package deal with crank....
cobra jet block, factory four bolt block, with pro-gram engineering caps, bushed lifter bores, had aluminum rod break, needs one sleeve, 4.440 bore, 500.00
cobra jet block, factory 2 bolt with aftermarket 4 bolt steel caps on front four mains, fresh 4.440 bore, 800.00
4 or 5 LARGE big block ford cams for 500-650 cubic inch engines, most for nitrous stuff, comp cams custom grinds, call for info, 200.00 each
sheet metal intake for 9.800 deck with standard cobra jet head, can be used on 10.300 deck with 1/2 spacer on each side, hogans intake, with fuel rails for fuel injection, top can be put on it for carbs, 500.00
custom valve covers for C-460 heads, short... 125.00
I have a ton of other big block parts too call for info...
(765)617-8655
tstrange@anchorfluidpower.com
4340 forged 4.150 crank, .010 mains/std. rods, rod journals are 2.100 with big block chevy width, 750.00
6.990 aluminum rods for above crank, 40 1/8th mile passes on rods, R&R pro billit rods, .990 pin 450.00
or package deal with crank....
cobra jet block, factory four bolt block, with pro-gram engineering caps, bushed lifter bores, had aluminum rod break, needs one sleeve, 4.440 bore, 500.00
cobra jet block, factory 2 bolt with aftermarket 4 bolt steel caps on front four mains, fresh 4.440 bore, 800.00
4 or 5 LARGE big block ford cams for 500-650 cubic inch engines, most for nitrous stuff, comp cams custom grinds, call for info, 200.00 each
sheet metal intake for 9.800 deck with standard cobra jet head, can be used on 10.300 deck with 1/2 spacer on each side, hogans intake, with fuel rails for fuel injection, top can be put on it for carbs, 500.00
custom valve covers for C-460 heads, short... 125.00
I have a ton of other big block parts too call for info...
(765)617-8655
tstrange@anchorfluidpower.com