rear coil overs and anti roll bar* help*

[SKUNK]

well doing the rear coilover conversion moving the coilovers in, with a antiroll bar. lets see some pics of how the best way to do this is.
since the antiroll bar runs between the framerails, where should i run the
upper coilover mount? pics if you guys have any

thanks jeremy
Darkbluestang@yahoo.com

[SKUNK]

nobody?

[jspeed]

Unless your doing a Ladder Bar/4 Link you can purchase a Coil-over shock mounting kit that will place the coil-over shocks in the stock shocks location. Allowing the use of a Mustang specific Anti-roll bar. See Competition Engineering's P/N C2056 @
http://www.competitionengineering.com/catalog/CategoryDisplay.asp?CatCode=10035

[SKUNK]

i dont want the stock location,
before my axle tubes were welded, the axle tubes ripped out and
ripped the upper shock mount (pass rear) and its been respot welded
but i dont trust it so thats why i want to get a coilover kit that relocates inward.

[Sean Knighton]

You need to talk to Dave Zimmerman and explain what you need. He can be a tremendous help and nice products too. Do a search for Team Z motorsports.

[jspeed]

Take a look at the link below. This may be more up your alley. Once the coil-overs are installed you can simply install a universal anti-roll bar.

http://www.flemworld.com/Hto/mtub.html

[chokinred]

Here is how my roll bar and coil overs were mounted up, as I was doing my mini tub job..

I too thought there would be a problem getting them both back there.. But once you start the job, you'll see that there is plenty of room..

http://hometown.aol.com/choknred/images/rear mock-1.jpg

[drwizrd]

chokinred....very nice and simple. clean looking mod! I have been condisdering coil overs on the back, after seeing your mod I may just go with it!:)