Line Lock/Transbrake Question

[roadwarriorsvt]

I'm wiring up a 97 Cobra that has a MSD DIS-4 (built in 2-step) and a transbrake (C-4). Usually the transbrake is grounded and the 12V wire is ran thru a momentary switch. On the MSD 2-step, it has power internally, only the ground wire is ran thru a momentary switch. Is it OK to wire the transbrake hot and connect both transbrake and 2-step grounds into a momentary switch? Thanks for any info.

[DAVE_308]

I can't coment on trans brakes but when I used the 2 step and line lock with the Dis-4 in the car that is what I did hot strait wired then ground switched. If the trans brake has a hot and ground that need connected I don't see why it wouldn't work your just completing the circuit with the switch. Hot or ground shouldn't matter how you complete the loop. Later. Dave

[roadwarriorsvt]

Thanks bro. Although I have a ground coming from the transbrake solonoid, I'm wondering it thats an adddition to being self grounded? Think I'll call a transbrake company. Thanks for the response Dave.

[Blown284]

I'm wiring up a 97 Cobra that has a MSD DIS-4 (built in 2-step) and a transbrake (C-4). Usually the transbrake is grounded and the 12V wire is ran thru a momentary switch. On the MSD 2-step, it has power internally, only the ground wire is ran thru a momentary switch. Is it OK to wire the transbrake hot and connect both transbrake and 2-step grounds into a momentary switch? Thanks for any info.

Yes I believe that will work. I'm running the MSD DIS4 PLUS and that's how I planned on wiring it up... :-)

-Tim

[roadwarriorsvt]

I wired it up already. It works that way.

[Blown284]

I wired it up already. It works that way.

Ok thank you. I'll try that :-) That's how I was going to wire mine up. :D

[roadwarriorsvt]

I can fax you a simple diagram if you'd like. Its pretty easy.

[Blown284]

I can fax you a simple diagram if you'd like. Its pretty easy.

Don't have a fax. CAn you import it and send to me?

[roadwarriorsvt]

Let me see if I can figure out this new printer/scanner.etc. thingie. You can PM me you're e-mail.

[roadwarriorsvt]

I've had a few request for the transbrake/MSD DIS 2 step wiring diagram. This is very basic, but it helped me out.


http://i7.photobucket.com/albums/y288/roadwarriorsvt/scan0001.jpg

[97tntcobra]

im only getting a red x can you send a dia to roudyccobra@yahoo.com