Racecraft 2" Drop Spindles

[fpaultan]

Has anyone used the Racecraft 2" drop spindles? I have an 04 with a PA K-member, a-arms(1"shorter than stock), Strange struts and coil over kit. Will I have problems setting up the front end if I use stock 93 spindles? I am trying to tuck the front wheel inside the fender to get the car lower. Any help would be great. Thanks

[powerjames]

I have them on our project car. They work really well. We have your exact setup - PA k-member with 1" shortened a-arms and strange struts.

The Racecraft spindles worked perfect - however to use Wilwood brakes we did need to modify the spindle bracket.

James

[fpaultan]

What kind of caster camber plates did you use? I have a set of HPMs I was going to use but after looking into it more I thought the Maximum Motorsports were better choice. Thanks.

[powerjames]

We used Maximum Motorsports camber-caster plates. With these you can get about 5 degrees of caster. If you go with the Skinny Kid plates you can get 8-10 degrees, but you will need to weld them (partially) to the strut tower, so it's more involved.

James