10'' wheel guys in here

[conbread]

I need a set of convopros 10''x15 but the only bs is in 5'' will this work or will it stick out to far. thanks for any help.

[brothern2o]

it will stick out at least an inch I have had 6.5 bs on my 15x10's for years

[conbread]

will it work with the five inch bs or will it look stupid

[brothern2o]

imo the 6.5 allows the tire to just tuck under the outer wheel lip and of course full susp. travel I don't like a tire to far in and definately don't care for when the tire sticks outside of the body

[BOOSTED FLAMER]

imo the 6.5 allows the tire to just tuck under the outer wheel lip and of course full susp. travel I don't like a tire to far in and definately don't care for when the tire sticks outside of the body


X2

15X10 6.5" BS for sure !!!

I have a set of 275/60 MT DR on 15x10 6.5's and they fit perfect. Your not gonna get a bigger tire to tuck in without minitubing it. A little inner fender work and a trim or roll to the fender lip and your done.

[Sixty feet]

on our (my friends) sn-95 D.R. car: 15x10 , 6.0" b.s. , VERY minor inner hammering , 325/50 bfg , sidewall is flush with outside of body@ top center of fender opening(using anti-rool bar and installed bumpstops to prevent tire from "tucking" too far)
.... friend has 15x10 6.5 b.s. with 275/60 on fox body (looks perfect)

[saleen_n_around]

Gonna stick out bad on a Fox body car.

This is a 15 x 10 w/ 6" BS Weld Alumastar

http://i2.photobucket.com/albums/y22/saleen_n_around/DSC00088.jpg

http://i2.photobucket.com/albums/y22/saleen_n_around/DSC00089.jpg

http://i2.photobucket.com/albums/y22/saleen_n_around/DSC00092.jpg