2005 / 2006 Drag Suspension Parts

[Granatelli]

http://www.granatellimotorsports.com/images/artlr/GM-SBE0507small.jpg

$60.00

[Granatelli]

http://www.granatellimotorsports.com/images/artlr/GM-SBE0507small.jpg

$60.00

2005-06 Mustang
Sway Bar Eliminator

•Fits 2005-06 Mustang GT
•Replaces front sway bar
•Lightens front end
•Improves weight transfer & traction
•Dramatically improves 60 ft. times
•HD tubular steel w/precision welds
•Durable powder coated finish
•Includes all necessary hardware
•Installs in approximately 1-hour using basic hand tools

http://www.granatellimotorsports.com/images/artlr/GM-PRB0507small.jpg

$245 a set

2005-06 Mustang
Panhard Rod (Race) lower double adjustable
Panhard Rod (Brace) Upper fixed

http://www.granatellimotorsports.com/05mustang/panhardrod.htm
•Fits 2005-06 Mustang GT and V-6
•Direct OEM replacement
•Reduces wheel hop & chassis flex, improves handling
•HD tubular steel w/precision welds
•Exclusive forged end technology is stronger than a rod end (street version only)
•Durable powder coated finish
•Includes all necessary hardware
•Installs in approximately 1-2 hours using basic hand tools

http://www.granatellimotorsports.com/images/artlr/GMGS7998small.jpg
8.8 Girdle Support $109.00
•Fits 1979-06 Mustangs with factory 8.8" rear ends
•Direct OEM replacement
•H.D. aluminum girdle system
•Improves rear end life & durability, dissipates heat faster
•Exclusive bearing support system prevents side load bearing deflection
•Ideal for street or racing use
•Includes all necessary hardware
•Installs in approximately 30 minutes using basic hand tools (synthetic fluid recommended)
http://www.granatellimotorsports.com/ford88girdlesystems.htm


http://www.granatellimotorsports.com/images/artlr/GM-STBR0507small.jpg
Rear Shock tower braces - $145.00
•Fits 2005-06 Mustang GT & V-6
•Limits torsional flex
•Increases chassis strength
•HD tubular mandrel bent steel w/precision welds
•Durable Chrome Plated finish
•Includes all necessary hardware
•Installs in approximately 1-hour (welding required)
http://www.granatellimotorsports.com/05mustang/shocktowerbrace.htm

http://www.granatellimotorsports.com/images/artlr/GM-DSL0507small.jpg
NMRA/NHRA legal Front and Rear Driveshaft Loop System $175.00
•Fits 2005-06 Mustang GT and V-6
•Dual design covers factory 2-piece drive shaft
•Meets SFI specifications
•Adds racing drive shaft safety
•HD steel tubing with precision welds
•Durable powder coated finish
•Includes all necessary hardware
•Installs in approximately 1-hour using basic hand tools
•Front and rear sold separately or as a kit
This is more then just a driveshaft loop. It supports the front and rear of the chassis tub
http://www.granatellimotorsports.com/05mustang/driveshaftsafetyloop.htm

http://www.granatellimotorsports.com/images/artlr/GM-STB-0507-Sbsmall.jpg
Simple yet effective - Strut tower brace - $25.00 - Yes just $25.00

http://www.granatellimotorsports.com/images/artlr/GM-STB0507-Dsmall.jpg
Up grade to Polished Stainless Steel - supports all four bolts on sturt towers - $99.00
•Fits 2005-06 Mustang GT and V-6
•Clears stock and aftermarket hoods
•Reduces chassis flex, improves handling
•HD tubular mandrel bent steel (single street), stainless (double street & race) w/precision welds
•Durable powder coated finish (single street) or stainless steel (double street or race)
•Includes all necessary hardware
•Installs in approximately 15-minutes using basic hand tools
http://www.granatellimotorsports.com/05mustang/strutbrace.htm

http://www.granatellimotorsports.com/images/artlr/GM-ASB0507small.jpg
A-Arm support brace - $25.00
•Fits 2005-06 Mustang GT and V-6
•Improves handling, limits g-loading
•Reduces A-Arm flex
•Ideal for lowered cars
•HD tubular steel w/precision welds
•Durable powder coated finish
•Includes all necessary hardware
•Installs in approximately 30 minutes using basic hand tools
http://www.granatellimotorsports.com/05mustang/a-armbrace.htm

http://www.granatellimotorsports.com/images/artlr/GM-CA0507-Ssmall.jpg
Not like the rest - Forged Chrome-molly ends with Chromed Stainless body - Street version - $105.00
http://www.granatellimotorsports.com/images/artlr/GM-CA0507-Rsmall.jpg
Race Version - High Strength rods ends - $130.00
Control Arms:
•Fits 2005-06 Mustang GT and V-6
•Direct OEM replacement
•Eliminate flex, control wheel hop, improve traction
•Fully adjustable for pinion angle which greatly improves traction
•Exclusive forged end technology is stronger than a rod end (street version only)
•Street version uses urethane bushings, race version uses heims
•HD tubular steel w/precision welds
•Durable corrosion resistant finish
•Includes all necessary hardware
•Installs in approximately 1-2 hours using basic hand tools

[Granatelli]

http://www.granatellimotorsports.com/images/artlr/GM-CA0507Usmall.jpg
Upper 3rd link - $125.00
•Fits 2005-06 Mustang GT and V-6
•Direct OEM replacement
•Eliminate flex, controls wheel hop & body roll
•Fully adjustable for pinion angle which greatly improves traction
•HD tubular steel w/precision welds
•Durable corrosion resistant finish
•Includes all necessary hardware
•Installs in approximately 1-hour using basic hand tools
http://www.granatellimotorsports.com/05mustang/controlarms.htm

http://www.granatellimotorsports.com/images/artlr/760505small.jpg
Granatelli Tyre Fryers $75.00
Universal Line Lock

•Fits most vehicles
•Won't void your factory warranty
•Allows easy locking of front or rear brakes at will
•Ideal for keeping your vehicle straight while towing down hill or in the staging lanes at the strip
•Features 1/100,000 of a second release time & has been tested up to 30 Gs without failure
•Includes a re-buildable nickel-plated solenoid valve, activation switch (shifter mountable), arming light, stainless steel inserts, black chromate heat sinks
•Installation takes 1-hour (brake line modifications & bleeding of brakes by qualified brake technician)
http://www.granatellimotorsports.com/linelock.htm


http://www.granatellimotorsports.com/images/artlr/GM-MM0507small.jpg
Solid Motor Mounts - Urethane or Delrin - $99.00
•Fits 2005-06 Mustang GT
•Direct OEM replacement
•Eliminates engine twist in chassis from weak factory Hydra mounts
•Transmits more power to the ground
•Includes all necessary hardware
•Kit include 2 different durometer urethane bushings for 50% better performance than factory or solid bushings
•Installs in approximately 1-2 hours using basic hand tools
http://www.granatellimotorsports.com/05mustang/motormounts.htm

[Granatelli]

Amazing how little the traffic is here:eek: