who makes a rear 5 lug brake set up for c clip eliminators

[papis408]

I 'm looking at doing a 5 lug converison and already have the Cobra 13" front set up. I have new Moser 31 spline axles w/ c clip elims and I've heard they make your track width wider than stock. I 'm running Saleen authentic rims that require the stock track width in order for them not to stick out of the fender well.

Can c clips be pressed in further than what they come manufacturer or is there a brake setup that places everything in the stock location??

[SVTED]

Aerospace. Great brakes. Ed

[papis408]

Aerospace. Great brakes. Ed

got a prt#?

[SVTED]

No Part# but you can call them @ 727-347-9915 Real nice people to talk to. Web- www.aerospacecomponents.com Ed

[roadwarriorsvt]

Aerospace. Great brakes. Ed


X's 2 !

[stlrenegade]

The aerospace brackets are approx. 1/4" thick, they will widen your track width.

[papis408]

The aerospace brackets are approx. 1/4" thick, they will widen your track width.


so basically I'm screwed? Is there any company or alternative to keeping the stock track width?

[SKUNK]

wilwoods on mine, with very minor modification

[papis408]

wilwoods on mine, with very minor modification
care to elaborate w/ prt #'s or what had to be done? Thanks in advance

[SKUNK]

p/n 140-3018-bd
heres a link to some pics of them http://forums.stlmustangs.com/index.php?showtopic=53281&hl=

all you really need to do is make a piece for the bracket, to close the circle, the top of the axle tube, the bracket is a little more than a half circle i just cut a piece out of 1/4inch alumn. to " close the circle,
then the spacers that it comes with need to be thinned down so the caliper lines up

or heres how summit did it,, view the slide show the bracket that they had cut, is what i made the piece for. kinda hard to explain, on the computer
http://www.summitracing.com/landing/mustang/ln_02feature.htm?ID=%7B3D87E2A1-6D1B-454F-B4EB-B9E1B75347D7%7D&Type=5