PDA

View Full Version : nos crass plate jetting


redneck408
09-18-2006, 05:48 AM
anyone using this plate what jetting are u using NOS JETTING is vert fat anyone have any ideas for a 250hp shot

nos 44x2
fuel 45x2

Joshua207
09-18-2006, 10:53 PM
yes i had that plate,,i were using the old jets a 275 was 65n 73f and it ran 7psi at 950 bottle but yea the new style is 44n 45f with 6 1/4psi i ran that it just didn't work out on mines i went back to my bigshot plate,you know its the same plate you can just use 1 bar and for an 275 run an 93n and 102f with 6 1/4 psi

redneck408
09-19-2006, 08:07 AM
what intake are u using is it ported did u use the cross plate or the big shot to run in the 8's

Joshua207
09-19-2006, 09:14 AM
an ported vic jr,i am running an 1050 carb..with the bigshot.. the cross plate i have the same problem you're having to rich

redneck408
09-25-2006, 09:11 AM
jetted crossplate on dyno nos jetting way off 44nos 45 fuel used 55 nos and 45 fuel made extra 100hp on top of what it made previous and still running way rich on the dyno

8 svo 4
09-25-2006, 12:55 PM
an equivalent jetting to a 300 shot would be in the 66n and 58f on both ends of the crossbar, and i would run it with between 6.25 and 6.5 fuel. your a/f will have alot to do with how you jet the carb also, the way my old setup was i always ran teh carb a little fatter to prevent detenation on pump gas driving on the street and could lean the nitrous out a little bit with no worry with the race gas... worked out well for me...