PDA

View Full Version : BBF twin turbo project.

goz10sonmotor
09-22-2006, 07:08 PM
Hi guys i'm looking for some help.I'm building a 1988 turbo coupe street strip car.I'm building a 466/a460 heads.I have 2 t70 turbos.The help I need is I need to see if anyone can help me with what type of cam specs I should be looking for?Thank Bob
coupe
10-13-2006, 02:25 PM
Something rather mild should spool them nicely...but what brand are the turbos? Have any details on them and what trans?
killerkx327
10-13-2006, 08:46 PM
try jay allen at www.camshaftinnovations.com he can hook you right up.
TA@TCI
10-19-2006, 06:29 AM
Eric Dillard or Steve Petty at Proline Race Engines (770) 516-0745. They know turbos! Hope this helps!
96Mustang460cid
12-21-2006, 09:25 AM
Turbo's don't need nearly as much cam as NA motors. Keep the overlap to a minimum. If your heads have 'less-than-optimum' I/E ratios, bias the cam a little to the exhaust side.

Any competent cam shop should be able to spec you one exactly. Also, for reference, you can see what the SBF and SBC guys are running for specs. While yours will be different, the 'basics' should be similar.

Have a good day!
Michael