PDA

View Full Version : Building Flow Tools

ffr3247r
10-02-2006, 07:37 AM
Trying to get a laundy list of parts needed to bulid one to flow my fuel side. I know you can buy a complete setup from some nitrous companies. I wold think you could build one for half price. Who has done it and knows what to get. I have 6an from regulator to fuel solenoid.

Thanks
ondagas88
10-03-2006, 04:32 PM
Trying to get a laundy list of parts needed to bulid one to flow my fuel side. I know you can buy a complete setup from some nitrous companies. I wold think you could build one for half price. Who has done it and knows what to get. I have 6an from regulator to fuel solenoid.

Thanks
#6 fem-#3male with a guage port mill off the end of the #3 an just leaving the threads drill it to the same i.d. as the fuel jet (pill) stem insert it then put a long enuff #3 braided line to empty in a jug. the guage port needs to have a accurate guage on it! this can be left on the car if you do it right also!
ffr3247r
10-03-2006, 05:20 PM
do they sell a 6an to 3an with a gauge port?
ondagas88
10-04-2006, 04:11 AM
do they sell a 6an to 3an with a gauge port?
sorry but no they dont thats my fault but you can use #6-#6 w/guage port, a 3/8 male pipe-1/8th pipe reducer then get a 1/8th male pipe-#3 an and your there! what ever the combo you have to have a guage port and a jet fitted in a #3 an fitting!
Joshua207
10-04-2006, 06:36 AM
the way i do mines,,i screwed the end out my other plate i had lyin around,and put the fuel jet in it i'm using and hook my soleniod to it and do it as i were racing...with it flowing through the jet and let it run in a jug..i haven't had any problems..it will be just like you're spraying..cause with the flowing tool you still have the use the right jet..
ondagas88
10-04-2006, 08:17 PM
the way i do mines,,i screwed the end out my other plate i had lyin around,and put the fuel jet in it i'm using and hook my soleniod to it and do it as i were racing...with it flowing through the jet and let it run in a jug..i haven't had any problems..it will be just like you're spraying..cause with the flowing tool you still have the use the right jet..
this is even MO' betta if he had a spare plate? been told to do it this way and this is the way I do it! run the car up round 3k rpm flow the carb regulator then do both the carb and the spray to what psi you need but I've also been told that you need to use the plate off the car you are using to be exact! I've got way to many things to unhook and block off for that!
Rumpshaker Racing
12-01-2006, 07:34 PM
Just before the season, I purchased the kit from NX and it was worth it. Have a couple of buddies go-in on it with you. Everything you need is in the case and they provide you with a LARGE gauge with visible numbers---sure you can do it cheaper but they took all the guess work out of it and we'll get our use out of it. Just my $0.02. Good luck, either way.
ONEBAD306CT
12-02-2006, 01:46 PM
you can just skip all the hassle and get this http://cgi.ebay.com/ebaymotors/Nitrous-Pro-Flow-Fuel-Flow-Tool_W0QQcmdZViewItemQQcategoryZ133203QQihZ015QQit emZ250004092628QQrdZ1QQsspagenameZWD1V best thing i ever used to tune nitrous and cheap to boot.
96GTS
12-02-2006, 05:59 PM
Nitrous Supply sells one for almost half the price that I found the NX kits for...
http://www.nitroussupply.com/proddetail.php?prod=NS-25960
8 svo 4
12-18-2006, 01:30 PM
that NS flow tool looks killer, just like the speed tech without the $300 price tag...
onebad12
01-05-2007, 08:50 AM
http://cgi.ebay.com/ebaymotors/Nitrous-Pro-Flow-Fuel-Flow-Tool_W0QQcmdZViewItemQQcategoryZ133203QQihZ015QQit emZ250004092628QQtcZphoto



I bought this and it works very good, made by Nitrous Pro Flow and only $50.00
JC302X
01-26-2007, 04:20 PM
you can just skip all the hassle and get this http://cgi.ebay.com/ebaymotors/Nitrous-Pro-Flow-Fuel-Flow-Tool_W0QQcmdZViewItemQQcategoryZ133203QQihZ015QQit emZ250004092628QQrdZ1QQsspagenameZWD1V best thing i ever used to tune nitrous and cheap to boot.


HEY I KNOW THIS IS OLD BUT JUST WANTED TO ASK YOU WERE DOES THE JET GOES I SEE IT'S GOT A 6# END THAT'S TO THE REG. DOES THE OTHER SIDE UNSCREW TO FIT THE JET OR WHAT?
Rumpshaker Racing
01-26-2007, 04:42 PM
http://cgi.ebay.com/ebaymotors/Nitrous-Pro-Flow-Fuel-Flow-Tool_W0QQcmdZViewItemQQcategoryZ133203QQihZ015QQit emZ250004092628QQtcZphoto



I bought this and it works very good, made by Nitrous Pro Flow and only $50.00

Yeah, that looks pretty accurate, right.....
ONEBAD306CT
01-28-2007, 06:59 PM
HEY I KNOW THIS IS OLD BUT JUST WANTED TO ASK YOU WERE DOES THE JET GOES I SEE IT'S GOT A 6# END THAT'S TO THE REG. DOES THE OTHER SIDE UNSCREW TO FIT THE JET OR WHAT?

yea the other end of the tool unscrews and u put the jet in there.