How is zex perimeter plate ?

[nuclearcobra]

Just wondering if anybody has any luck with them and if its an improvment over a cheater plate going to try it this weekend with a 150 shot. 76cobra2 311ci 10.85,1.44 60ft. in the heat with cheater plate.

[roy]

Go to the SPEEDTECH diffuser plate and you won't be sorry.

[nuclearcobra]

Roy are you saying the zex plate sucks or better than the cheater just not as good as speedtech?

[roy]

I am not saying anyones product sucks I just know from using the product how well SPEEDTECH nitrous systems work from a buyer stand point.

[redneck408]

how much are u sraying it with

[nuclearcobra]

Well sprayed away this weekend with a 150 shot and blew my mind i always pull the wheeles about 1 to 2 foot with a 1.44 best and 1.47 most of the time but on my first time run it stood straight up and hit the rear bumper never thought this car would need wheele bars the short time was 1.39 and 6.802 in the 1/8 US 13 in delmar DE is a 1/4 track but yesterday cause of high winds they only let us run the 1/8 the next 2 runs were normal both 1.47 60ft. pulling about 2ft. in the air so dont know why it would stand up like that guess i just got in the groove damn sure didnt like it i was shakin like a big puss then all day i got mobbed by groups of people wanting to know how much juice and how big of a stroker it was most didnt believe its a 302 .060 over with iron heads (world product windsor just port matched to victor jr) comp solid flat tappet 260@.050 592lift kb hyperujunktec pistons holly 650 dp 4000 stall pa c4 currie 9 in. with 430s MT 28X9 DRAGS 35 spline axles and spool 3035lbs with me in it.best on motor 11.96 1.61 60ft. now i wana try a solid roller and my jegs kasse heads.76cobra2

[R347GT]

Use the best Nitrous Proflow. I've used there plates and there's no comparison, when your sprayin 150 on the wilson plate it's like sprayin a 180 on nos plate. There bottles out flow anybodys, as well.