427mustang
11-25-2006, 08:48 AM
Griffin double pass radiator, 18"x24" core, 19x28 overall. Two 1" rows. With shroud and twin 11" SPAL high performance fans.
$300
http://home.centurytel.net/427mustang/Radiator.jpg
Spec Stage 4+ clutch for Ford Windsor. Rated 800 HP. Not even broken in yet, less than 50 miles on clutch. Ten spline disc. Includes billet steel flywheel (zero balance but will accept weights) and throwout bearing.
$300
http://home.centurytel.net/427mustang/Clutch.jpg
Rear seat delete for 99-04 Mustang. Not show ready, but in decent shape.
$50
http://home.centurytel.net/427mustang/Delete.jpg
Fluidyne DB-30816 engine oil cooler. 28"x3.5"x3.5"
$50
http://home.centurytel.net/427mustang/Cooler.jpg
Pair of Aluminum ramps. 6 feet long arched rated 2500 lbs each.
$100
http://home.centurytel.net/427mustang/Ramps.jpg
Polished 135 amp 3G alternator, with polished pulley.
$100
Hawk HP+ HB183N.660 (D627A) rear brake pads (non Cobra). Barely used.
$25
ABS/Traction control from '01 Mustang GT with <5000 miles.
$25
Firewall adjuster for Mustang clutch cable.
$10
SCE copper exhaust header gaskets, part number 4436. New.
$20
Earls billet pcv and breather set. Image from Earl's website. No grommets.
$10
http://home.centurytel.net/427mustang/3435erl.jpg
http://home.centurytel.net/427mustang/3434112.jpg
Reichard Racing adjustable timing pointer for SBF. Not show ready, but good condition. Image is from RR website.
$25
http://home.centurytel.net/427mustang/Timing.jpg
Pi-thon Hose Locks. http://www.pi-thon.com/products.htm
One 1A-08 and one 1A-10. Fits 1/2" rubber/-10AN braided and 5/8" rubber/-12AN braided respectively. Red Anodized. Two wrenches included.
Show condition. Image is from Pi-thon website.
http://home.centurytel.net/427mustang/Pi-thons.jpg
$25
FRPP 10th Ann Cobra shift knob. Leather w/CF look. Part number M-7213-C. 6 speed.
Excellent condition. Image from FRPP.
$30
http://home.centurytel.net/427mustang/M7213C.jpg
Oil cooler sandwich adapter for SBF. Flexalite part number 3961. No O-ring. With pipe to -10AN adapters installed.
$15
Steeda idle bypass valve (http://www.steeda.ca/catalogue_product_type_372.asp)
$20
TFI module, Motorcraft part # DY-679. F1PZ-12A297-A. New in box.
$10
Pair of fog lamps and bezels from '00 Cobra. No use. Like new.
$20
Passenger side mirror from '01 GT. Excellent condition.
$20
Tony Branda fiberglass lower quarter scoops for '67/'68 Mustang. Never installed.
$25
Edelbrock bushings for using 7/16 head bolts on 1/2" heads. Part number 9680. NIB.
$20
March pulleys and brackets. Used except where noted.
30028 bracket only, no rod. $10
1670 crank and wp only, no alt pulley. Crank pulley is used, wp pulley is new. Also 3/8" crank pulley spacer. $50
30040 idler and bracket. $50
$300
http://home.centurytel.net/427mustang/Radiator.jpg
Spec Stage 4+ clutch for Ford Windsor. Rated 800 HP. Not even broken in yet, less than 50 miles on clutch. Ten spline disc. Includes billet steel flywheel (zero balance but will accept weights) and throwout bearing.
$300
http://home.centurytel.net/427mustang/Clutch.jpg
Rear seat delete for 99-04 Mustang. Not show ready, but in decent shape.
$50
http://home.centurytel.net/427mustang/Delete.jpg
Fluidyne DB-30816 engine oil cooler. 28"x3.5"x3.5"
$50
http://home.centurytel.net/427mustang/Cooler.jpg
Pair of Aluminum ramps. 6 feet long arched rated 2500 lbs each.
$100
http://home.centurytel.net/427mustang/Ramps.jpg
Polished 135 amp 3G alternator, with polished pulley.
$100
Hawk HP+ HB183N.660 (D627A) rear brake pads (non Cobra). Barely used.
$25
ABS/Traction control from '01 Mustang GT with <5000 miles.
$25
Firewall adjuster for Mustang clutch cable.
$10
SCE copper exhaust header gaskets, part number 4436. New.
$20
Earls billet pcv and breather set. Image from Earl's website. No grommets.
$10
http://home.centurytel.net/427mustang/3435erl.jpg
http://home.centurytel.net/427mustang/3434112.jpg
Reichard Racing adjustable timing pointer for SBF. Not show ready, but good condition. Image is from RR website.
$25
http://home.centurytel.net/427mustang/Timing.jpg
Pi-thon Hose Locks. http://www.pi-thon.com/products.htm
One 1A-08 and one 1A-10. Fits 1/2" rubber/-10AN braided and 5/8" rubber/-12AN braided respectively. Red Anodized. Two wrenches included.
Show condition. Image is from Pi-thon website.
http://home.centurytel.net/427mustang/Pi-thons.jpg
$25
FRPP 10th Ann Cobra shift knob. Leather w/CF look. Part number M-7213-C. 6 speed.
Excellent condition. Image from FRPP.
$30
http://home.centurytel.net/427mustang/M7213C.jpg
Oil cooler sandwich adapter for SBF. Flexalite part number 3961. No O-ring. With pipe to -10AN adapters installed.
$15
Steeda idle bypass valve (http://www.steeda.ca/catalogue_product_type_372.asp)
$20
TFI module, Motorcraft part # DY-679. F1PZ-12A297-A. New in box.
$10
Pair of fog lamps and bezels from '00 Cobra. No use. Like new.
$20
Passenger side mirror from '01 GT. Excellent condition.
$20
Tony Branda fiberglass lower quarter scoops for '67/'68 Mustang. Never installed.
$25
Edelbrock bushings for using 7/16 head bolts on 1/2" heads. Part number 9680. NIB.
$20
March pulleys and brackets. Used except where noted.
30028 bracket only, no rod. $10
1670 crank and wp only, no alt pulley. Crank pulley is used, wp pulley is new. Also 3/8" crank pulley spacer. $50
30040 idler and bracket. $50