Compucar jet map needed

[craigmac]

I have converted my Compucar EFI system to a carb. system by purchasing a plate from Compucar. Is anyone else running a Compucar plate that may be able to hook me up with a jet map for this system. Thanks

[FOMOCO]

50 Hp 39n 39g 125 Hp 52n 52g 175 Hp 59n 62g 225 Hp 70n 73g 275 Hp 78n 81g

[craigmac]

50 Hp 39n 39g 125 Hp 52n 52g 175 Hp 59n 62g 225 Hp 70n 73g 275 Hp 78n 81g
Thanks for your help.

[craigmac]

50 Hp 39n 39g 125 Hp 52n 52g 175 Hp 59n 62g 225 Hp 70n 73g 275 Hp 78n 81g
What kind of fuel pressure should I run and what size test jet do I use to flow the fuel solinoid with. Thanks

[FOMOCO]

I use a compucar flow guage with a 73 jet in it. Noy knowing what your set up is its hard to say. I would set the fuel perss at 5.5 and go about 330ft shut it off and pull some plugs.Adj the fuel perss if needed. Then just go little more each time till you make a full pass

[craigmac]

I use a compucar flow guage with a 73 jet in it. Noy knowing what your set up is its hard to say. I would set the fuel perss at 5.5 and go about 330ft shut it off and pull some plugs.Adj the fuel perss if needed. Then just go little more each time till you make a full pass
Sounds good, thanks again.