N2O88
02-09-2003, 04:16 PM
Go here for more information and pics:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33631&item=2401374540&rd=1
I need $700 plus shipping for the setup. The headers alone were over $1000. There is about $1500 in the whole deal.
Oh, I used a stock k member, with canfield heads, c4 big bell, and HPM drop mounts. I had to trim some notches into the bracing for the K, but it worked without problems. That probably wouldn't have been required with normal height mounts, but I wanted to fit a vic jr under the stock hood. These are for a 302 based motor only. I can't give you any info on aftermarket k's, but I would assume there wouldn't be an issue.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33631&item=2401374540&rd=1
I need $700 plus shipping for the setup. The headers alone were over $1000. There is about $1500 in the whole deal.
Oh, I used a stock k member, with canfield heads, c4 big bell, and HPM drop mounts. I had to trim some notches into the bracing for the K, but it worked without problems. That probably wouldn't have been required with normal height mounts, but I wanted to fit a vic jr under the stock hood. These are for a 302 based motor only. I can't give you any info on aftermarket k's, but I would assume there wouldn't be an issue.