Real Street - Naturally Aspirated E.T'S?

[curtis]

What is the typical naturally aspirated e.t. from the nitrous cars?

[CHRIS TUTEN]

I have never made a motor pass in my car but Brent made 1, i believe it ran a 12.20 bogging off the line with a 1.7 60' if i'm not mistaken. i only dynoed mine on motor and never cared t make a motor pass cause we don't race motor.

[curtis]

How fast has anyone gone straight motor with the stock camshaft? If you do not mind answering i can understand but roughly how much hp Chris did yours make on the dyno (i am not running RS just curious for my own street car).

[CHRIS TUTEN]

i won't tell on nitrous( i'm sure you understand) but on motor it made 290 hp @ 5200 & 319 ft-lb @4200 at the rear wheels.

chris tuten r/s #10
ctuten@atsperformance.com

[tmotorsports]

i have a poor mans motor in mine.
stock shortblock 302
stock cam
fox lake real street twisted wedge heads most expensive part on motor
70 mm throttle body
73mm mass air
24# injectors
5-speed of course
3:73 gear
3300# mustang

so far best on motor

12:81 112 mph
never tuned

best on 175hp nos
11:41 120mph

[curtis]

Thanks for the replies guys, the reason i ask is i am contemplating on keeping the stock shaft in one of my street cars and seeing how quick i can get it to run both on motor & spray (it is lighter than a RS car and also is carbed). I remember years ago that Ed Smith went 11.79 with a stock cam on motor......Man that was awhile ago.