builttorace1820
11-13-2007, 08:17 PM
These heads started as raw E460 castings. The program was altered to move the bolt holes when machined so they will fit on aftermarket blocks such as the A460 and Eliminator. Our program also alters the intake valve 3 degrees to produce a better port and chamber shape.
2.520" intake valves----578cfm
1.810" exhaust---------380 cfm
Bare heads with cnc porting------$6000.00
http://www.svrehorsepower.com
Steve
704-701-4235
2.520" intake valves----578cfm
1.810" exhaust---------380 cfm
Bare heads with cnc porting------$6000.00
http://www.svrehorsepower.com
Steve
704-701-4235