PDA

View Full Version : Water/radiator fittings

Puzzled
11-17-2007, 12:00 PM
Water/radiator fittings

I have a set of Yates heads that have the AN fitting in the front for the water passages. What are you guys using to adapt the heads to the radiator? And from where are you scoring it?
ryan408
11-17-2007, 05:36 PM
Go to this address and check it out. I have one on my car with yates heads and it work out great.

http://cgi.ebay.com/ebaymotors/NEW-FORD-WATER-OUTLETS-WATER-GOOSE-NECKS-12-16AN_W0QQcmdZViewItemQQcategoryZ33602QQihZ003QQite mZ130172501604QQrdZ1QQsspagenameZWDVW
Puzzled
11-18-2007, 04:57 AM
That is funny, my heads came from Midway as well as he has ground the last four cams for me. Go figure. Thanks for the link.
Badboss418
11-18-2007, 08:58 AM
There are some adapters that go from hose to an style, or you could just have male an bungs welded to the radiator.