HorseC
11-19-2007, 02:29 PM
Bought New Race Car, everything must go including car!!
Parts for Sale, most are brand new, they were installed on car but never used include:
1986 Ford Mustang GT T-top Red (ROLLING CHASSIS), includes 8 point roll cage, MSD Digital 6 box, 10 Gal Fuel Cell, Kirkey Race Seat, Grant Steering Wheel, custom aluminum Dash cluster with Autolite gauges. Asking $3500.00
Aerospace Pro Street Brake Kit comes with 4 piston calipers, Drilled & Slotted Rotors Zinc plated, 10 3/4
Retail for $790.00 will take $625.00
Aerospace Rear Drag Race Brakes comes with 4 piston calipers, brake hat with multi bolt pattern, 11 3/8 rotors, pads, brackets, and hardware, already drilled for 5/8 studs for Mustang 5 lug bolt pattern, for an 8.8 with c-clip eliminators
Retail for $440.00 will take $350.00
:D
Ford 8.8 Rear End with 4.30 Ford Racing Gears, Moser 35 spline axels with 5/8 studs, welded axel tubes, and Ultimate 8.8 cover
Will take 900.00
Barry Grant 400GPH Electric Fuel Pump PN 170001 had -10 AN inlet & outlet, and -8 AN bypass
Retail $415.00 will take $350.00
Holley 350GPH Dominator Series Fuel Pump (Electric) has -10 An Inlet, -8 AN outlet, and -8 An bypass
Retail $397.00 will take 300.00
Holley 4150 HP Pro Series Carb, 1000+CFM, mechanical secondary, down leg style boosters Part # 0-80513-1
Retail $725.00 will take $600.00
Aeromotive Fuel Pressure Regulator, 4 port Carbureted style, features 2 -10An inlet ports, 4 -6 An outlet ports, and 1/8 NPT gauge port
Retail $195.99 will take 150.00
QA1 Tubular K-Member 79-95 Mustang
Retail $240.00 will take 190.00
UPR Chrome Moly A Arms 79-93 Mustang
Retail $339.00 will take $280.00
Motor427 cubic inch Bennett Racing short block, 13.5 to 1 compression, Dart Block, Scat crank and rods, Ross Pistons, custom ground Comp Cams Camshaft, TFS High Ports Cylinder Heads from Summit Racing part # TFS-5170T010-C01, billet timing chain, canton oil pan, Edelbrock Super Victor Carb intake, Harland Sharp shaft mounted Rocker arms, CV Products 3/8 chrome moly push rods, also includes Kooks custom headers 2 primary tubes with 3.5 collectors mild steel. Motor has never been run, installed in car, car has never fired!
Parts total over $14K will take $12K for all
Please call or email me if you would like more information or pictures
Ask for Tina 804-684-2727 or toll free at 1-800-761-8775 or email me at
tina@vitalemotorsports.net
Parts for Sale, most are brand new, they were installed on car but never used include:
1986 Ford Mustang GT T-top Red (ROLLING CHASSIS), includes 8 point roll cage, MSD Digital 6 box, 10 Gal Fuel Cell, Kirkey Race Seat, Grant Steering Wheel, custom aluminum Dash cluster with Autolite gauges. Asking $3500.00
Aerospace Pro Street Brake Kit comes with 4 piston calipers, Drilled & Slotted Rotors Zinc plated, 10 3/4
Retail for $790.00 will take $625.00
Aerospace Rear Drag Race Brakes comes with 4 piston calipers, brake hat with multi bolt pattern, 11 3/8 rotors, pads, brackets, and hardware, already drilled for 5/8 studs for Mustang 5 lug bolt pattern, for an 8.8 with c-clip eliminators
Retail for $440.00 will take $350.00
:D
Ford 8.8 Rear End with 4.30 Ford Racing Gears, Moser 35 spline axels with 5/8 studs, welded axel tubes, and Ultimate 8.8 cover
Will take 900.00
Barry Grant 400GPH Electric Fuel Pump PN 170001 had -10 AN inlet & outlet, and -8 AN bypass
Retail $415.00 will take $350.00
Holley 350GPH Dominator Series Fuel Pump (Electric) has -10 An Inlet, -8 AN outlet, and -8 An bypass
Retail $397.00 will take 300.00
Holley 4150 HP Pro Series Carb, 1000+CFM, mechanical secondary, down leg style boosters Part # 0-80513-1
Retail $725.00 will take $600.00
Aeromotive Fuel Pressure Regulator, 4 port Carbureted style, features 2 -10An inlet ports, 4 -6 An outlet ports, and 1/8 NPT gauge port
Retail $195.99 will take 150.00
QA1 Tubular K-Member 79-95 Mustang
Retail $240.00 will take 190.00
UPR Chrome Moly A Arms 79-93 Mustang
Retail $339.00 will take $280.00
Motor427 cubic inch Bennett Racing short block, 13.5 to 1 compression, Dart Block, Scat crank and rods, Ross Pistons, custom ground Comp Cams Camshaft, TFS High Ports Cylinder Heads from Summit Racing part # TFS-5170T010-C01, billet timing chain, canton oil pan, Edelbrock Super Victor Carb intake, Harland Sharp shaft mounted Rocker arms, CV Products 3/8 chrome moly push rods, also includes Kooks custom headers 2 primary tubes with 3.5 collectors mild steel. Motor has never been run, installed in car, car has never fired!
Parts total over $14K will take $12K for all
Please call or email me if you would like more information or pictures
Ask for Tina 804-684-2727 or toll free at 1-800-761-8775 or email me at
tina@vitalemotorsports.net