NMRA Trey
04-29-2008, 05:11 PM
NMRA Pro Outlaw 10.5
7: BODY
Vehicle must retain original appearances and profiles for year and make of body. Only 1950 & newer Ford production vehicles permitted. Factory quarter panels, factory pillar posts, door jambs, and roof required. Lightweight body panels restricted to: front end/fenders, doors, hood/scoop, bumpers, and trunk-lid/hatch/deck-lid. Fiberglass fenders must be bolt-on replacements and have OEM appearance and function. Carbon Fiber is an acceptable lightweight substitute for Fiberglass. One-piece front ends (fenders and front valance/bumper) are permitted, but must retain OEM appearance. Hood must be separate from the front end. Driver and passenger doors must be functional and operable from inside and outside of vehicle.
12: STREET LEGAL REQUIREMENTS
Headlights and tail lights for year & make of body used mandatory. Complete sealed beam headlamp lenses, running lights, or NMRA accepted replica headlamps (i.e. painted on, or decals) and tail lamps assembly must be installed. Vehicle may retain day light appearance. Tail lights required to be functional.
7: BODY
Vehicle must retain original appearances and profiles for year and make of body. Only 1950 & newer Ford production vehicles permitted. Factory quarter panels, factory pillar posts, door jambs, and roof required. Lightweight body panels restricted to: front end/fenders, doors, hood/scoop, bumpers, and trunk-lid/hatch/deck-lid. Fiberglass fenders must be bolt-on replacements and have OEM appearance and function. Carbon Fiber is an acceptable lightweight substitute for Fiberglass. One-piece front ends (fenders and front valance/bumper) are permitted, but must retain OEM appearance. Hood must be separate from the front end. Driver and passenger doors must be functional and operable from inside and outside of vehicle.
12: STREET LEGAL REQUIREMENTS
Headlights and tail lights for year & make of body used mandatory. Complete sealed beam headlamp lenses, running lights, or NMRA accepted replica headlamps (i.e. painted on, or decals) and tail lamps assembly must be installed. Vehicle may retain day light appearance. Tail lights required to be functional.