PDA

View Full Version : Steering wheel hub question

jumbo
02-23-2009, 03:44 AM
Has anyone ever used a quick connect steering wheel hub on a factory mustang steering column? If so which hub did you buy?
RACECRAFT INC.
02-23-2009, 04:29 AM
Racecraft has this set up, it does move the wheel back about 2 1/2 inches and you have to use a Grant 5 bolt pattern wheel.

http://www.racecraft.com/prodimages/quickkit.jpg

http://www.racecraft.com/prodimages/hubadpt2.jpg


Mark Wilkinson
http://www.racecraft.com
fastback536
02-23-2009, 05:46 AM
I had the same question a little while back

http://www.nmradigital.com/forums/showthread.php?t=84973
jumbo
02-23-2009, 11:44 AM
Racecraft has this set up, it does move the wheel back about 2 1/2 inches and you have to use a Grant 5 bolt pattern wheel.




Mark Wilkinson
http://www.racecraft.com

When you say "back about 2 1/2 inches" you do mean back away from you, towards the dash correct?
rmracing
02-23-2009, 05:55 PM
When you say "back about 2 1/2 inches" you do mean back away from you, towards the dash correct?

It sits back toward the driver about 2 1/2 inches . It puts the wheel in your lap basically .
jumbo
02-24-2009, 02:33 AM
It sits back toward the driver about 2 1/2 inches . It puts the wheel in your lap basically .

Im not so sure id like that. Im a big ole boy. Thanks for the info.
RACECRAFT INC.
02-24-2009, 04:32 AM
Jumbo,

It depends on how you like to be positioned in the car and how far you sit back in the seat. If you want to try one, call the shop and talk to Matt, if you don't like it send it back.

Mark Wilkinson
http://www.racecraft.com
jumbo
02-25-2009, 11:43 AM
Alright thanks
Redsnk95
02-25-2009, 05:30 PM
Mark...what are yall using the cover up the exposed area? I am assuming this stuff works on 94-up cars as well?