Wanted to buy 86 - 93 coupe

[fordman]

I am looking for a car to make into a race only car.Doesn't need to have motor or trans.Or would be interested in a car set up for racing but must have nhra certfied roll cage & chasis. You can just reply here or send me a private mess.THANKS

[Brian]

i just posted a add for my car check it out please.:D

[Phreakfree]

you can check mine out too, set up for street/strip duty, no cage though, but still the best of both worlds!

[boost]

hey john you looking to step up or just gettin another car together. just curious jay o/c 9225

[boost]

i may have something for you if you are going to be at atco i will talk to you there later jay o/c 9225 p.s or send me a reply before then

[fordman]

Hey jay i am just looking to do a new car a later model.I will see you a atco later john

[jerryc]

I have a 90 model coupe.The car has a 8pt cage, subframe connectors,fuel cell with 1/2 fuel line,set up for a parachute,the car has a 317 with eldebrock alumin heads, vic jr,and alot of other stuff anyway I live in Kentucky and if your interested email me at sampson_chris@hotmail.com and I can send you some pics of the car.The car body is perfect its blue with a black harwood 5inch lift off hood.Thanks Chris

[ts86]

i have a 86 gt with a 87-93 front end. the car is set up to race 6 point cage, driveshaft loop, 5 gallon fuel cell dynamic mighty might c4, stock block 306 trw dome pistons 12 to 1 compression victor sr. heads new valves and pushrods lunati 602 lift cam victor jr intake barry grant 750 motor and trans judt rebuilt has 7 passes runs 11's on motor will run 9's on spray. i will have to find out if the cage is nmra approved the car is all race hardly any stock parts including alternator and starter invested over 12'000 letting go for 6,500 o.b.o painting car as we speak should be done by this weekend. if the cage is ok the only part needed for nmra approval should be the fire wall because it's a hatch with a fuel cell. e-mail me if interested i will give you full details. ts1278@yahoo.com

[200horse]

I have a mintubbed outlaw chassis certified. Ladder bar rear,coil overs,wheelie bars,9 inch ford 2 fuel systems,aluminium radiator, tubular front end,coil overs, professionally built car for more infor e-mail me at twbnos@aol.com

[RickKersey]

If you are still looking for a mustang I have one you might be interested in! Itis a 83 GT backhalved car.Very sharp Has a narrowed 9" with Strange spool and 33 spline axles,4:30 gear,C6 trans,TA shifter 10 pt cage NHRA cert to 7.50 window net welded sub with 2 safety loops Koni coil overs bump stop caster camber plates ladder bars manual rack and brakes Welds with 12 1/2x31 M/T 8 gal cell with 2 holley pumps BG reg. much more Chassis and cage updated by Skinny Kid Race Cars. Set up for BBF Jet Hot coated Hookers for CJ head big block included. Low mile very clean!!! Save a lot by getting a car with this much done!! Just needs motor & convertor to finish.I have $6,800 in it but will sacrifice see it and make offer. Thanks, Rick

[bainbridge]

The engine is a 302 that I had just freshened up about 2 months ago. The engine had 80,000 miles on it and I replaced rings, bearing, and gaskets. It is a roller motor with a Ford Motorsport F303 cam, Victor jr. intake manifold, 750 holley carb., top gun-NOS nitrous kit, MSD distributor and 6AL ignition box, 1 ¾ full length MAC headers with 3” exhaust and flowmaster mufflers. It has a C-4 trans with a reverse manual valve body, winters pro shifter, a Coan 4000 nitrous stall converter and a 4:10 gear. The car has Weld draglite wheels with M/T 28-10.5 drag ET slicks, 8 point rollbar, frame connectors, Southside traction bars, mallory 140 fuel pump with a 12 gallon fuel cell. ¼ mile E.T. 12.82 @ 105 on motor and 10.87 @ 122 on 150hp nitrous. Please e-mail me with any questions at davidnmisty@comcast.net or jjb55@comcast.net . You may also call me at home 734 331 2994.

[KJ Jones]

Hi, John. I've got an '84 GT that has the '85/'86 front end on it. It's my old O/C car. Ran it in NMRA Phoenix events in O/C...qualified #2 in '99 and #1 in Y2K in Open Comp. Car works good with small block. Has FastTracks traction bars, 6-point roll bar, nitrous bottle mounts built into roll bar, interior, fuel system and more. Good car. Not "exactly" what you're looking for, but it's a car that's set up to move quickly and be consistent w/good drivetrain.

Take a look at this page for pics and more info...http://www.kjjones.com and select "Race Car for Sale." You're doing good this season. Hope to meet you this December at NMRA banquet. We did not meet last year or at WFC.

[ahurl90]

here is a 86 2500 obo. my e-mail adress is ahurl90@hotmail.com

[ahurl90]

sorry i post wrong pic.oops:eek: here is the right pic

[d_sierchio]

iv got a 87 coupe with full cage 2x3 subframes parachute mount 2 race seats and mounted belt mounts alluminium fuel cell window net car was never raced all brackets are there belt mounts tourqe boxes no motor $2500