Add a finishing touch to any noise-blocking or sound-damping project with versatile Boom Mat Tape from Design Engineering, Inc. Offering the same qualities as Design Engineering, Inc.'s Boom Mat damping material, multipurpose Boom Mat Tape helps reduce vehicle road noise, sound system vibrations, rattles, dashboard plastic-to-plastic chafing and more. It can be used to cover seams, fix leaks and secure and protect cables, wires and lines. Boom Mat tape is for those hard-to-reach areas, as well as for covering wire and cable harnesses running on or along the sides of floorboards, said Mike Buca of Design Engineering, Inc.. Cover seams and gaps on doors, floor pans, deck lids and trunk areas, to name just a few, or stick it anywhere spot coverage for vibration is needed. Possibilities extend far beyond just vehicles, with plenty of in-home applications, such as applying Boom Mat Tape to the bottom of metal sinks to eliminate ringing, or on sump pump pipes to keep them from vibrating. Simple to use, Boom Mat Tape requires no special tools for installation. The easy-to-cut material comfortably conforms to a variety of shapes and adheres to any metal, aluminum, fiberglass or plastic material, as well as many types of foam padding and fabrics. Made from 2.5mm-thick butyl rubber with aluminum facing, Boom Mat Tape is offered in 2"-wide-by-20-foot black rolls (# 50215) as well as 1.5 -wide-by-20-foot silver rolls (# 50449). Simple peel-and-stick application is aided by an easy-to-remove clear release liner. For more information, visit www.DesignEngineering.com. (Content courtesy of Design Engineering, Inc.)