Gulfcoast Driveshaft recently released a new 3.5-inch-diameter, aluminum driveshaft for 2018-newer Ford Mustangs with the 5.0-liter V-8 and A10 automatic transmissions.

If you’re looking to replace or upgrade your 1994-2004 Mustang K-member, QA1 has the bolt-in solution. QA1 tubular K-members are lighter and stronger and offer more exhaust clearance than factory Mustang K-members.

There are two sides to creating a safe drag racing environment at the Holley NMRA Ford Nationals and Red Line Oil NMCA Muscle Car Nationals.

Cold-Gold Sleeve Offers Superior Thermal Protection with a Distinct Appearance for Wiring Harnesses, Fuel and Brake Lines and Linkages.

Mac’s Custom Tie Downs keeps the NMRA/NMCA trailers organized and secured for the tens of thousands of miles travesed each year with its national event series.

Holley Dominator EFI kits are available for variety of popular applications, such as LS kits with and without drive-by-wire and transmission control and several universal kits for conventional pushrod Ford and Chevrolet engines.

Haltech releases new solid-state, programmable power distribution module.

In the world of high performance, Valve Cover Breathers have become a staple under the hood. CFM Performance has been in the game for years, so it knows the importance of proper crankcase ventilation.

Auto manufacturers transitioned from cable-actuated throttle bodies to drive-by-wire units to reduce weight and complexity while providing more accurate throttle control.

Prevent damage and burn-through of critical dynamometers tie-downs with DEI’s Dyno Strap Heat Guard.

Wilwood now offers upgraded D11 direct replacement calipers for 1965-67 Ford Mustang, Fairlane, and 1966-67 Ranchero originally equipped with Kelsey-Hayes brakes.

The UPR Bolt-in Anti-Roll Bar is part of the Pro-Series Suspension Kit used by all UPR racers in eliminating body roll and stabilizing the car down the track.

There is nothing quite like the thrill of cranking the throttle of a freshly installed carb and hearing the engine roar, an audible confirmation of a well-done performance upgrade. 

Ramping up performance with higher compression or power adders increases cylinder pressure exponentially.

With engine builders striving to build higher amounts of combustion pressure through increasing supercharger and turbocharger boost levels, Manley Performance has the answer for these high exhaust temperature environments with its expanded Extreme Duty valve line.

A street performance tire that’s ready for the drag strip, the D.O.T. approved ET Street S/S and ET Street R tires feature Mickey Thompson’s R2 drag tire compound, the same proven compound used on Mickey Thompson’s ET Street Radial Pro tires.

Your engine relies on its valves to control the flow of air and fuel into the cylinder, seal the combustion in, and allow the spent exhaust gasses to exit.

Trying to figure out the best way to get your Holley EFI Dash or Racepak Dash to fit in the factory location of your classic vehicle?

Reduce Installation Time and Effort, Increase Exhaust System Performance and Reduce Radiant Heat with Heatshield Armor Exhaust Insulation from Heatshield Products 

Power management company Eaton today announced its Vehicle Group is now offering Master Differential Install Kits that simplify the process of upgrading to an Eaton aftermarket differential.

The RACE Gate-Way allows plug-and-play Holley EFI in modern muscle machines

The Ford 9-inch rear axle is one of the most popular differentials in automotive history and the go-to choice for performance applications.

The options are many for upgrading the Forward drum on TH400 racing transmissions.

Stop skirting the safety rules and install a proper roll cage already.

Anderson Composites has introduced new carbon fiber fenders for the 2020-2021 Mustang Shelby GT500 model. These new vented fenders, Type-TPF (SKU # AC-FF20FDMU500-TPF) were designed to release unwanted hot air from the brake area. The new design features a semi-arced opening towards the top of the wheel well with a removable screen mesh. The molded vent was designed to work seamlessly with ...

Heatshield Products' new patent-pending Pro-Boot™ Shield spark plug boot protector keeps spark plug boots from being damaged by underhood heat, including from exhaust manifolds or headers, thereby preventing ignition misfires or failure and potential engine damage. Spark plug boots are constantly exposed to radiated or direct-contact heat, whether a vehicle has a cast-iron exhaust manifo...

Moroso has introduced a Tri-Lobe Two Stage Dry Sump Pump (part number 22372) that has a right side Motor- plate Mount and a 3/8" hex fuel pump drive with 1:1 ratio that accepts the popular 1.450 ID, 3 bolt, fuel pump swivel clamps. An expansion of the company's popular line of external oil pumps, this pump gives users the option of scavenging oil from the oil pan with one stage and using ...

The new Derale PWM Fan Controller continuously monitors and controls engine temperature, increasing the vehicle's cooling efficiency using Soft Start Technology. Fans ramp-up slowly, eliminating harmful AMP spikes. The unit will continuously monitor engine temperature and operate the fans at the optimum fan rate as needed. The net result is the electric fans often only run between 40-60% ...

Wilwood Racing’s new front kits for struts with spindle-mounted wheels are some of the lightest brakes available, at less than six pounds per wheel. That includes the Dynalite billet aluminum single-piston caliper, 10.00” drilled rotor, hat, brackets, brake lines and hardware. These kits deliver supplemental braking on cars using rear brakes and parachutes for most of their stopping. Kits a...

NMRA Tech Committee Releases Renegade and X275 Preliminary Rules November 18, 2021-For the 2022 season, the NMRA Technical Committee worked with John Sears (RTRA Series) to maintain a universal rule set for Ultra Street, NMCA Xtreme Street and NMRA Renegade in 2022. The 2022 Renegade preliminary rules have been released on the NMRA website. Additionally, the RTRA and NMRA have also posted th...

By Mary Lendzion Justin Fogelsonger began watching NMRA racing when the exciting series first emerged. Then, he dove into Richmond Gear Factory Stock in 2014, and hasn’t looked back. While his responsibilities at work prevented him from competing all six events on the annual tour in years past, he was able to attend all six events on the 2021 tour, and the end result was rewarding. I...

By Mary Lendzion Joel Greathouse is utterly unflinching when he is in the driver’s seat of his very dramatic Mustang. With equal parts of grace and grit, he handles everything from boisterous racing to bumps in the road, and fellow racers and race fans witnessed that when he earned the 2020 NMRA Edelbrock Renegade championship, and again when he gave it everything he had to back it up in 2...

By Mary Lendzion Chris Parisi has been racing in various cars and series since 1990, and he has amassed a lot of wins in that time. In fact, he’s a multi-time NMRA HP Tuners Super Stang champion, and throughout 2021, he showed how he soared to that status. In his Mustang GT Premium packing a 5.0 Coyote, Steeda cold air intake, 10-speed automatic transmission and Circle D converter, the ...

By Mary Lendzion When Woody Pack came to NMRA ARP Open Comp eight years ago, he immediately felt at home. He liked the cars, combinations and competitors, and he lapped up as much information as possible so that he could be consistent and competitive in his 1966 Mustang powered by a 451 cubic-inch engine built by Albert Performance and paired with a Powerglide built by Ray Eller. The Virg...

Finned aluminum brake fluid reservoirs from Wilwood give firewalls a unique high-performance look. Machining ribs in the billet reduces weight, now 4.6 oz. - 3 oz. less than Wilwood's standard billet reservoir, and increases surface area for passive cooling. These durable reservoirs hold 4 oz. of fluid and can be mounted directly to Wilwood's single or tandem remote master cylinders, or pl...

Champion, a recognized leader in racing and specialty lubricants, has launched its Champion Full-Synthetic Racing Power Steering Fluid. Champion Racing Power Steering Fluid reduces temperatures and delivers consistent steering response in competition applications. It has exceptional low temperature flow that reduces initial drag on the racing pump. Its robust formulation is a full-synthetic...

With as easy as it is to make loads of horsepower these days, eclipsing the OEM safety equipment on the drag strip is fairly easy to do, but companies like Maximum Motorsports offer safety upgrades to keep you safe and to keep you legal with the drag racing sanctioning bodies and tracks. While Maximum Motorsports is largely known for its incredible suspension components for all things late-model M...

Fuelab has rounded out its new PRO Series line by introducing the 868 PRO Series filters. With a 10gpm rating, these filters offer huge flow capacity with very little pressure drop. First, we developed the 6.0gpm PRO Series spur gear pump, then we refreshed the 565 regulator to go with it, but we knew our existing filter offerings were not up to the task of handling the increased flow , ...

Mike Thermos and his team at Nitrous Supply have come up with a pair of carbon fiber nitrous bottle packages for serious racers. One has the upgrade Super Flow bottle valve and the other has the unique PowerValve developed by Nitrous Supply and used by many leading racers as it improves performance. The popular Super-Flow valve from Nitrous Supply has several important enhancements, inclu...

VP Trigger is a patented push-button, self-venting, control flow valve that's developed for use with 5-gallon Motorsport Containers. It takes seconds to install and makes refueling extremely efficient and a breeze. Simply tilt your container and press the Trigger button for flow and release the Trigger button to quickly stop the flow. As a result of its unique no-spill design, you can say goodbye ...

Lava Battery Heat Shield from Heatshield Products protects a vehicle battery from the damaging effects of excessive underhood heat exposure. The number one enemy of a battery is heat. Excessive heat exposure or heat-soak can significantly decrease cranking power and shorten a battery's lifespan. Getting the most life from the battery is more valuable than ever. Lava Battery Heat Shield utili...

Stronger fuel injection drivers power the new MicroSquirt ECU update from tuning experts AMP EFI/DIYAutoTune. Called AMP'd MicroSquirt, the unit also features a protected crank input for engines triggering from a coil negative. The upgrades allow tuners to easily enable spark outputs or fit Hall effect and optical sensors without the need to wire-in external resistors. MicroSquirt has long ...

When it comes to delivering mega-four-digit power in a racing application, running a fuel pump that is up to the task is a literal lifeline. Not only is a quality pump essential for producing maximum power, but it is key to the survival of the engine when your foot is too the floor. A name synonymous with high-performance fueling is Weldon. That said, the fueling products for automotive applica...

Prevent pressure drops in high RPM GM TH400 and Powerglide racing applications with this new, specially calibrated high RPM checkball capsule from Sonnax. Testing has shown that OEM checkballs in listed racing applications are unreliable above 5,500 rpm. At higher speeds the checkballs can unseat, resulting in drop of line pressure or converter pressure. There are many variables that effect che...

Fuelab has added to its popular line of adjustable fuel pressure regulators. The 595 Ultralight Series bypass regulators bridge the gap between the popular 515/525 Series and the monster 565 Series regulators. Our expansive line of adjustable fuel pressure regulators have always been solid performers," said Josh Davis, Fuelab'sales representative. "You tell us your pressure and flow require...

Control vibrations, noise and heat in one product with new Sound Barrier sheets from Design Engineering, Inc. They regulates noise and temperatures inside vehicle interiors for a cool, comfortable ride. Lightweight and easy to install, the sheets can be cut and then glued, mechanically fastened or laid under carpet for a custom fit in any space. Or pair 3 wide double-sided transfer tape (#5020...

Wiring can be cleaned up with an MSD Solid State Relay Block. The module takes the place of four standard relays and eliminates unsightly wiring. Four independent channels can be activated using either power or ground. Each channel is capable of handling 50 amps for up to eight seconds or 20 amps of continuous current. With 4 channels providing up to 200 amps of momentary or 80 amps constant co...

Hot rodding and heat go hand in hand. After all, it is in the name. Making more power often means pumping out more heat. However, when your machine is in competition, that heat can reduce performance and even lead to premature part failure. As such, the aftermarket developed a number of cooling components, most of which are designed to keep engine temperature in check. Meziere Enterprises is one s...

Whether it's your race car or tow vehicle, keeping your transmission fluid cool is crucial to reliability and longevity. Flex-A-Lite's stacked-plate transmission cooler provides maximum cooling efficiency far above tube and fin designs or factory in-the-radiator coolers. It's available with barbed or AN- fittings. For more information, click HERE (Content courtesy of Flex-A-Lite)

Linked In Breaking down the Haltech Nexus R5 Vehicle Control Unit in a 7-second Mustang Written by Michael Galimi Photography by the author The integration and merging of technology is happening across all areas of our lives, some of it is readily apparent and some of it is not so obvious. Home entertainment used to be a simple television set, and after 50 years, it is being shoved aside by ...