Dayco, a leading engine products and drive systems specialist for the automotive, industrial and aftermarket sectors, is growing its line of high performance racing products for today’s engine builders and race teams.

For some, rowing the gears is the only way to fly. That is the mantra of Jeff Smith. Known as the Stick Shift Dude on social media, he is a regular in stick-shift racing across the Southeast, including consistent appearances in the TREMEC Stick Shift Shootout a several Holley NMRA Ford Nationals events.

Ford Modular engine builders can now indulge in their quest for more power with the introduction of MAHLE Motorsport’s new Ford 5.0L, Modular Coyote PowerPak Piston set for 2018+ engines.

Check out the hottest new parts for 2023 in our Performance Product Showcase. This is the perfect time to get the best new parts for your race car build, so it is ready to go when the season starts.

AutoRod’s new ARC-6001Z Flat Touch switch panel is designed with racers in mind with a host of features designed to work in any race car.

With roots that can be traced back to the 1800s, Oliver Racing Parts is newer than its parent company by comparison but built a brand based on producing tested, trusted and tough connecting rods for the high-performance industry over the last 40 years.
 

Intelligent power management company Eaton today introduced its Twin Vortices Series (TVS^®) X3100 supercharger for aftermarket applications.

Advanced Fuel & Ignition Systems recently released an all-new line of high-performance fuel injectors designed for Pro Mod-style engines.

Ford fans will be excited to learn that Whipple Superchargers has been working hard and has announced it will have kits ready to go for the 2024 Mustang GT and the much-anticipated Dark Horse special edition.

The Ridetech kit is designed to improve suspension geometry and improve tunability and handling and it can be used with conventional coil-over shocks or with air suspension.

Ford Performance Set To Release An Updated Cobra Jet Intake Manifold for For the Coyote Engine

Ford Performance Solves Swap Problem With New Intake

Camshafts, and the shape of the lobes on them, can play a dramatic effect on how a vehicle performs at different engine speeds. Understanding how they work—and the different types available—will help you to maximize your four-stroke engine’s performance. 

You might think of synthetic oils as a relatively modern development in the world of performance, but Red Line Synthetic Oil began offering its advanced lubrication products more than four decades ago when Peter Filice and Tim Kerrigan founded Red Line Synthetic Oil in 1979.

In the world of sway bars (anti-roll bars), bigger seems to be better. Can they be too big? Or do you even need a sway bar at all? There’s a lot of questions you might be asking yourself about sway bars.

Just because a problem arose after installing a new part, doesn’t always mean the new part is the problem.

After being involved in revolutionizing the sport of drag racing through his pioneering work with nitrous oxide, Dale Vaznaian is doing it again with his innovative new company, Compressed Air Supercharging.

The latest pushrod powerplant to enter the hot-rodding realm is the Ford 7.3-liter Godzilla engine.

Until now to follow the rules of most sanctioning bodies a remote recovery tank would have to be plumbed off the overflow hose.

To supply those vehicles means adding fuel pumps with increased flow, and the specialists at Aeromotive offer drop-in fuel pump modules for recent and current Ford, Mopar, and GM applications.

Users asked and Design Engineering, Inc. delivered. DEI’s popular Titanium Knitted Sleeves are now available in a smaller size to fit 3" to 3.5" (# 10042) OD exhaust and turbo pipes, up to 36" in length.

Gulfcoast Driveshaft recently released a new 3.5-inch-diameter, aluminum driveshaft for 2018-newer Ford Mustangs with the 5.0-liter V-8 and A10 automatic transmissions.

If you’re looking to replace or upgrade your 1994-2004 Mustang K-member, QA1 has the bolt-in solution. QA1 tubular K-members are lighter and stronger and offer more exhaust clearance than factory Mustang K-members.

There are two sides to creating a safe drag racing environment at the Holley NMRA Ford Nationals and Red Line Oil NMCA Muscle Car Nationals.

Cold-Gold Sleeve Offers Superior Thermal Protection with a Distinct Appearance for Wiring Harnesses, Fuel and Brake Lines and Linkages.

Mac’s Custom Tie Downs keeps the NMRA/NMCA trailers organized and secured for the tens of thousands of miles travesed each year with its national event series.

Holley Dominator EFI kits are available for variety of popular applications, such as LS kits with and without drive-by-wire and transmission control and several universal kits for conventional pushrod Ford and Chevrolet engines.

Haltech releases new solid-state, programmable power distribution module.

In the world of high performance, Valve Cover Breathers have become a staple under the hood. CFM Performance has been in the game for years, so it knows the importance of proper crankcase ventilation.

Auto manufacturers transitioned from cable-actuated throttle bodies to drive-by-wire units to reduce weight and complexity while providing more accurate throttle control.

Prevent damage and burn-through of critical dynamometers tie-downs with DEI’s Dyno Strap Heat Guard.

Wilwood now offers upgraded D11 direct replacement calipers for 1965-67 Ford Mustang, Fairlane, and 1966-67 Ranchero originally equipped with Kelsey-Hayes brakes.

The UPR Bolt-in Anti-Roll Bar is part of the Pro-Series Suspension Kit used by all UPR racers in eliminating body roll and stabilizing the car down the track.

There is nothing quite like the thrill of cranking the throttle of a freshly installed carb and hearing the engine roar, an audible confirmation of a well-done performance upgrade. 

Ramping up performance with higher compression or power adders increases cylinder pressure exponentially.

With engine builders striving to build higher amounts of combustion pressure through increasing supercharger and turbocharger boost levels, Manley Performance has the answer for these high exhaust temperature environments with its expanded Extreme Duty valve line.

A street performance tire that’s ready for the drag strip, the D.O.T. approved ET Street S/S and ET Street R tires feature Mickey Thompson’s R2 drag tire compound, the same proven compound used on Mickey Thompson’s ET Street Radial Pro tires.

Your engine relies on its valves to control the flow of air and fuel into the cylinder, seal the combustion in, and allow the spent exhaust gasses to exit.

Trying to figure out the best way to get your Holley EFI Dash or Racepak Dash to fit in the factory location of your classic vehicle?

Reduce Installation Time and Effort, Increase Exhaust System Performance and Reduce Radiant Heat with Heatshield Armor Exhaust Insulation from Heatshield Products 

Power management company Eaton today announced its Vehicle Group is now offering Master Differential Install Kits that simplify the process of upgrading to an Eaton aftermarket differential.

The RACE Gate-Way allows plug-and-play Holley EFI in modern muscle machines

The Ford 9-inch rear axle is one of the most popular differentials in automotive history and the go-to choice for performance applications.

The options are many for upgrading the Forward drum on TH400 racing transmissions.

Stop skirting the safety rules and install a proper roll cage already.

Anderson Composites has introduced new carbon fiber fenders for the 2020-2021 Mustang Shelby GT500 model. These new vented fenders, Type-TPF (SKU # AC-FF20FDMU500-TPF) were designed to release unwanted hot air from the brake area. The new design features a semi-arced opening towards the top of the wheel well with a removable screen mesh. The molded vent was designed to work seamlessly with ...

Heatshield Products' new patent-pending Pro-Boot™ Shield spark plug boot protector keeps spark plug boots from being damaged by underhood heat, including from exhaust manifolds or headers, thereby preventing ignition misfires or failure and potential engine damage. Spark plug boots are constantly exposed to radiated or direct-contact heat, whether a vehicle has a cast-iron exhaust manifo...

Moroso has introduced a Tri-Lobe Two Stage Dry Sump Pump (part number 22372) that has a right side Motor- plate Mount and a 3/8" hex fuel pump drive with 1:1 ratio that accepts the popular 1.450 ID, 3 bolt, fuel pump swivel clamps. An expansion of the company's popular line of external oil pumps, this pump gives users the option of scavenging oil from the oil pan with one stage and using ...

The new Derale PWM Fan Controller continuously monitors and controls engine temperature, increasing the vehicle's cooling efficiency using Soft Start Technology. Fans ramp-up slowly, eliminating harmful AMP spikes. The unit will continuously monitor engine temperature and operate the fans at the optimum fan rate as needed. The net result is the electric fans often only run between 40-60% ...

Wilwood Racing’s new front kits for struts with spindle-mounted wheels are some of the lightest brakes available, at less than six pounds per wheel. That includes the Dynalite billet aluminum single-piston caliper, 10.00” drilled rotor, hat, brackets, brake lines and hardware. These kits deliver supplemental braking on cars using rear brakes and parachutes for most of their stopping. Kits a...