strange_engineering
 (x)
Strange Pro Touring Floater Kit
The new Strange Pro Touring floater kit (PN F5010) offers a needed product evolution for Pro Touring and Street vehicles. The street floater kit is highlighted by the forged Chromoly spindles, Chromoly hubs and 35-spline drive plates for the ultimate in strength and safety. When paired with the proprietary Wilwood brakes, this system eliminates piston knock-back and keeps the performance and feel ...
Strange Engineering Offers Nodular Iron Case for Street and Hardcore Street/Track Applications
Strange Engineering continues to meet the needs of its customers by offering a nodular iron case designed for street and hardcore street/track applications, with posi units, helical differentials and lockers, but still rigid and strong enough to use with a spool. Strength and rigidity are key factors to a foundation that helps allow smooth and quiet gear operation. The Strange S-Series nodular ...
Strange Engineering's New Billet U-Bolt Strap Kit Offers Strength and Reliability
Strange Engineering has introduced its new billet u-bolt strap kit. The chrome moly steel straps, ETD-150 steel studs and ARP thread locking nuts offer a 90 percent strength increase and superior reliability when compared to OEM style u-bolts. The consistent clamping force and 360 degree support of the u-joint cap increase u-joint life by reducing operating temperature and eliminating the poten...
Strange Engineering Promotes Benefits of Its Dual Rear Brake Kits
Dual rear brake kits have been become a familiar sight in the pits. Turbo-powered door-slammers can benefit from the extra clamping force as turbos are spooled up on the starting line, while sportsman cars and dragsters can have a second pair of calipers for additional braking or as a back-up brake system. Strange Engineering offers a full line of Pro Race Rear Dual Brake kits for all of the po...
Strange Engineering Offers Line of Billet Aluminum Main Caps
Strange Engineering's proven line of billet aluminum main caps improve strength for 8.8 Ford, GM 10 bolt, GM 12 bolt and Dana 60 housings. As horsepower increases, factory caps will deflect, which leads to premature wear of the gear and bearings, and ultimately resulting in failure. The Strange Engineering billet caps are made from 2024-T351 aluminum and provide increased rigidity and strength...
Strange Engineering's Black Friday Sale Features Ten Percent Off & Free Ground Shipping Nov. 20-30
Strange Engineering is kicking off the holiday season with a Black Friday Sale. The company is offering 10 percent off and free ground shipping to the contiguous 48 States, with no minimum, for online orders placed Nov. 20 until midnight Central Daylight Time on Nov. 30. Order processing will begin the following business day. Please note that not all Strange products are available for online...
Strange Engineering Offering Full Line of 9 -inch and 10-inch Gears from U.S. Gear and Motive
Strange Engineering is offering a full line of 9 -inch and 10-inch ring and pinion gear sets from U.S. Gear and Motive. Based on the popular 9-inch Ford design, these gears are capable of handling the ever-increasing horsepower in classes including Pro Mod, Alcohol Dragster, Alcohol Funny Car and Radial vs. the world. Gear ratios range from 3.25 to 5.14 in the 9 -inch gears and 3.89 to 6.20 i...
Strange Engineering Adds Alloy C-Clip Style Axles to Product Line
Strange Engineering continues to evolve its product line to meet the needs of today's car enthusiasts with the addition of alloy C-clip style axles. Made with the same quality as the proven Strange alloy axle line, the Strange C-clip style axles are significantly stronger than typical OEM axles. The axles are forged from alloy steel and are further enhanced with a deeper heat treatment. The axl...
Strange Engineering Offers S300M 40-Spline Gun-Drilled Floater Shafts
Evolving its product line to meet the needs of today's racers, Stange Engineering is now offering 300M 40-spline gun-drilled floater shafts for the most demanding of drag race applications. The .875 gun-drilled 300M floater shafts are 21 percent stronger than comparable 4340 shafts. Strange believes in offering the strongest components available to keep racers safe, on the track and off the trail...
Strange Engineering Creates Value Axle and Spool Package for 8.8" Fox Body Mustang Rear Ends
Strange Engineering has created a value axle and spool package for 8.8 Fox Body Mustang rear ends. The 35-spline alloy axles are forged from SAE 1550 modified steel. All machine work on the shaft and splines is completed prior to heat-treat, which offers increased torsional strength and creates a strong and reliable axle. The package includes a Strange lightweight chrome moly spool that carries a...
Strange Engineering S-Series Transmission and Pinion Yokes
Strange Engineering's heavy duty line of S-Series Transmission and Pinion yokes are manufactured from premium high-tensile-strength nodular iron castings. The transmission and pinion yokes are CNC-machined to ensure concentricity and balance for ideal driveshaft operation. Most popular domestic transmissions and rearends are covered by the wide variety of parts that Strange Engineering has to offe...
Project Update #PureEvil Goes 8.85 at 152 mph, sets New NA Coyote Record
By Michael Galimi Photos by the Author and Dave Milcarek A few weeks ago we teased on social media'dyno testing of Project #PureEvil's new engine combination, dubbed PE-2. It sounded rowdy, angry, and it crushed last year's combination by a wide margin. The new Rich Groh Racing masterpiece has more of everything and produced 744rwhp on JPC Racing s chassis dyno. For those keeping score that ...
Strange Engineering's New Quick Release Steering Coupler
Strange Engineering continues to improve and expand its superior line of products with the introduction of the new Quick Release Steering Coupler for Sparco steering wheels (Part #Q1200SPAR). Strange Engineering is proud to offer the SFI certified quick release steering coupler for the Sparco steering wheels. This new addition is made with the same high quality materials and tolerances as the e...
Sondra Leslie Looks to NMRA Steeda Limited Street with Vortech Superchargers | Presented by Nitto Tire
By Ainsley Jacobs Actions speak louder than words, so after years of dreaming about moving up to another class from her comfortable home in NMRA Richmond Gear Factory Stock, Sondra Leslie finally went all in and made the jump. Leslie has been a part of the NMRA community for years, having raced in Roush Super Stang before her latest stint in Factory Stock. I actually purchased a car to buil...
1 2 3 4 5 6 7 8 9 10 11 12 ...

join our

email list

You’ll be first to know about NMRA events, race results and so much more!